Article · 23 Nov 2012
Conference abstractPublished 13 May 2019
Petrophysical characterization and oil potentialities of unconventional resource development by utilizing physics of well log analysis and delta log r technique
Gemsa Petroleum Company (GEMPETCO), Egypt
Abstract
Select any words in the title or abstract, or press this and choose a sentence.
Looking at a formation as a source rock, then turning around and considering it a viable reservoir requires you to be able to shift your thinking and to analyze a great deal of data in a new way. If you don’t, you risk not understanding the nature of “sweet spots”. Method and/or Theory Petrophysical well log and formation micro-imager data (FMI) were integrated in an analysis of the reservoir characteristics. The study essentially determined reservoir properties such as lithology, shale volume, porosity (Φ), permeability (K), fluid saturation, and net pay thickness. Shale volume (Vsh) was calculated by CGR instead of total GR due to influence of organic matter and uranium concentration. Log interpretation indicated porosity in the 8-20 PU range by using neutron & density model , as well as movable hydrocarbons. The well was tested and produced oil at a fair rate. The methodology of Passey et al (1990) was used for Delta Log R calculation of TOC and involved overlay and base-lining of the resistivity and sonic logs and consideration of thermal maturity patterns. △logR technique is proposed by EXXON and ESSO company (Passey,1990) which employs the overlaying of porosity logs (sonic, density, neutron) in arithmetic coordinate and resistivity log in logarithmic coordinate with fixed superposition coefficient to identify and calculate TOC. With the appropriate baseline, we can calculate the △logR distribution to establish the quantitative interpretation relationship between TOC and △logR. Best calibration was made using the available data such as Image logs and △logR technique through wire line logs. Old wells was drilled on the same structure and exhibited the same characteristics (shows, logs). Conclusions These Source rocks are found to be highly productive reservoirs themselves, exhibit very good Porosity and fracture network. They give low and high productivity in some intervals according production logging tool (PLT). High geothermal gradient caused maturation of these formations. Uranium content masked the total GR response, So Spectral GR logs (SGR) should be highly recommended in unconventional resources to evaluate the clay content. △logR technique reflects mature source rocks with excellent quality, TOC is in the range of 2-9%, and matching with production.
Ask about this article
Answers come only from this article's title, abstract and keywords, each sentence pointing to where it comes from. Your question is sent to OpenAI to write the answer. Scholars Central does not store it.
Similar by topic
Research article · 2012
Petrophysical analysis of well logs for reservoir evaluation: A case study of ‘Laja’ Oil Field, Niger Delta
Research article · 2012
Petrophysical evaluation of uzek well using well log and core data, Offshore Depobelt, Niger Delta, Nigeria
Article · 2012
Mathematical modelling of petrophysical parameters for reservoir characterization using well log data
Research article · 2014
Delineation of stratigraphic sequence of adez off-shore field for adequate oil yield from 3-d seismic and well log data in Niger Delta, Nigeria
Follow
New articles from what you follow go into your email digest, once you agree to alert emails.
- SubjectPetroleum & Mining
- SubjectPhysics & Astronomy
- BylineArticles whose byline prints “Ahmed Rashed”
