Conference abstract · 10 Sep 2018
Conference abstractPublished 26 Apr 2019
Critical Interface in All-solid-state Li-ion Battery
University of Alberta, Canada
Abstract
Select any words in the title or abstract, or press this and choose a sentence.
The long-lasting environmental concerns arising from the use of fossil fuels and the rapid growth of renewable energy demand requires safe, large-scale, and reliable nextgeneration energy storage systems. All-solid-state lithium-ion batteries potentially offer enhanced energy and power density, and improved battery safety compared to the liquid electrolyte-based Li-ion batteries that are currently in use. Solid lithium-ion conductors such as thiophosphates are potential electrolyte materials for all-solid Li batteries because of their high Li+ ion conductivity, which is close to its liquid counterparts. Current challenges to achieving high performance all-solid-state batteries with long cycle life include shorting resulting predominantly from Li dendrite formation and infiltration through the solid electrolyte (SE), and increases in cell impedance induced by SE decomposition at the SE/electrode interface. In this work, we evaluate the electrochemical properties of two interlayer materials, Si and LiXAl(2-x/3)O3 (LiAlO), at the Li7P3S11 (LPS)/Li interface. Compared to the Li/LPS/Li symmetric cells in absence of interlayers, the presence of Si and LiAlO both significantly enhance the cycle number and total charge passing through the interface before failures resulting from cell shorting. In both cases, the noted improvements were accompanied by cell impedances that had increased substantially. The data reveal that both interlayers prevent the direct exposure of LPS to the metallic Li, and therefore eliminate the intrinsic LPS decomposition that occurs at Li surfaces before electrochemical cycling. After cycling, a reduction of LPS to Li2S at the interface when a Si interlayer is present; LiAlO, which functions to drop the potential between Li and LPS, suppresses LPS decomposition processes. The relative propensities towards SE decomposition follows from the electrochemical potentials at the interface which are dictated by the identities of the interlayer materials. This work provides new insights into the phase dynamics associated with specific choices for SE/electrode interlayer materials and the requirements they impose for realizing high efficiency, long lasting all-solid batteries.
Subjects
Energy & PowerAsk about this article
Answers come only from this article's title, abstract and keywords, each sentence pointing to where it comes from. Your question is sent to OpenAI to write the answer. Scholars Central does not store it.
Similar by topic
Conference abstract · 10 Sep 2018
Current challenges in fabrication and operation of oxide-based all-solid-state Li-batteries
Conference abstract · 29 Aug 2018
TEM studies of epitaxial oxide films for advanced all solid Li-ion batteries
Conference abstract · 15 Jul 2020
Effect of NASICON/Pvdf based Hybrid Solid Electrolyte Composition on the Electrode/ Electrolyte Interface Properties of Solid-State Lithium Batteries
Mini review · 19 Aug 2022
Electrochemical and Semiconductor Physics Perspective on the Positive Electrode-Solid Electrolyte Interface in an All-Solid-State Battery
Follow
New articles from what you follow go into your email digest, once you agree to alert emails.
- SubjectEnergy & Power
- BylineArticles whose byline prints “Lingzi Sang”
