Scholars Central

Conference abstractPublished 13 Jul 2017

Rational design and development of bioselective affinity materials for pharmaceutical applications

Authors: Zeynep Altintas

Technical University of Berlin, Germany

Ask about this article

Abstract

Select any words in the title or abstract, or press this and choose a sentence.

Statement of the Problem: The removal of pharmaceutical compounds from water sources has an immense impact on public health, since the contamination arising from their presence in drinking water leads to gain tolerance in human body and can significantly decrease the effective treatment later on. The use of rationally designed affinity materials in separation columns and membrane filters may help to solve this problem; therefore, pharmaceuticals specific molecularly imprinted polymers nanoparticles (MIPNPs) were synthesized and applied onto the polyvinylidene fluoride (PVDF) membranes previously subjected to the plasma treatment. Methodology & Theoretical Orientation: Computationally designed diclofenac-, metoprolol- and vancomycin-MIPs were applied onto the membranes and scanning electron microscopy was employed to visualize MIPNPs on the membrane. After functionalization of the membranes with target-specific MIPs the molecularly imprinted membranes (MIMs) affinity against their targets was evaluated using solid phase extraction (SPE) technique coupled with high performance liquid chromatography (HPLC). MIMs were used as filters to load the target solutions and evaluate the amount of pharmaceuticals in filtrate. Furthermore, a comparative study was performed by comparing the efficiency of MIMs functionalized either by adsorption or covalent immobilization. Findings: The capacity analysis of MIPNPs by SPE–HPLC revealed 100%, 96.3%, and 50.1% uptake of loaded solution of metoprolol, diclofenac and vancomycin, respectively. MIMs showed 99.6% uptake with a capacity of 60.39 ng cm2 for metoprolol; 94.7% uptake with a capacity of 45.09 ng cm2 for diclofenac; and 42.6% uptake with a capacity of 16.9 ng cm2 for vancomycin. HPLC detection limits of targets were found as 3.7, 7.5 and 15 ng mL−1 for diclofenac, metoprolol and vancomycin, respectively. A small scale pilot test was also conducted which indicates the promising future applications of the developed MIMs for high volume of filtrates especially in the case of the plasma-treated PVDF membranes prepared by covalent immobilization of the MIPs. Conclusion & Significance: MIPNPs were successfully incorporated into SPE columns and PVDF membrane. Nanostructured polymeric membrane is capable of capturing targets from water which demonstrates a new approach for water purification of pharmaceuticals.

Ask about this article

Answers come only from this article's title, abstract and keywords, each sentence pointing to where it comes from. Your question is sent to OpenAI to write the answer. Scholars Central does not store it.

Try:

Follow

New articles from what you follow go into your email digest, once you agree to alert emails.

  • SubjectPharmaceutical Sciences
  • SubjectMaterials Science
  • BylineArticles whose byline prints “Zeynep Altintas”

For authors and organisers

Publish, present and keep up with your field

Find the right journal for your paper and submit your manuscript.

Photo: Pexels