Conference abstract · 29 May 2017
Conference abstractPublished 11 Jul 2019
Semiconductor nanostructure engineering for solar hydrogen production
The University of Queensland, Australia
Abstract
Select any words in the title or abstract, or press this and choose a sentence.
Photoelecctrochemcial water splitting provides an attractive method to convert the abundant solar energy into sustainable and clean hydrogen energy. The greatest challenge is how to develop efficient and stable photoelectrodes, including photoanodes and photocathodes. Comparing to the widely studied photoanodes, the photocathodes have been paid less attention due to the scarcity of suitable semiconductor candidates. Some available photocathodes derived from p-type semiconductors such as single crystal Si, chalcogenide (e.g., CuInGaSe) are either not stable or too expensive to realize large scale application. Herein, a promising p-type semiconductor, CuBi2O4, has been used to fabricate efficient photocathode. Moreover, combining the CuBi2O4 photocathode with well-developed BiVO4 photoanode, it is able to demonstrate unbiased sunlight-driven solar water splitting. CuBi2O4 electrodes were prepared with electrodeposited BiOI and copper acetylacetonate as precusor after heating in air at 450oC for 4 hours. The CuBi2O4 photocathode possesses a porous nano branch strucutre and showed a photocurrent of -0.95 mA/cm2 at 0.21 VRHE along with an onset potential at 1.1 VRHE in Sodium Phosphate (~pH 7) electrolyte. With the presence of electron scavengers, the photocurrent was further enhanced to -2.4 mA/cm2 at 0.48 VRHE. The incident photon-to-current efficiency showed a threshold at ca. 620 nm, suggesting a broad light harvesting range of the CuBi2O4 photocathode. Furthermore, the large onset potential of CuBi2O4 photocathode makes it feasible to realize unbiased photoelectrode water splitting when combined with suitable photoanode, such as BiVO4. Figure: The photoresponse of CuBi2O4 and BiVO4 under chopped light. In conclusion, we have developed a new method for fabricating the state-of-the-art CuBi2O4 photocathode. Further combining with BiVO4 photoanode, it can achieve efficient unbiased water splitting.
Ask about this article
Answers come only from this article's title, abstract and keywords, each sentence pointing to where it comes from. Your question is sent to OpenAI to write the answer. Scholars Central does not store it.
Similar by topic
Short communication · 23 Sep 2020
Advanced Energy Materials 2019: Semiconductor nanostructureengineering for solar hydrogen production - Sabiha Akter Monny - The University of Queensland
Conference abstract · 29 May 2017
A Novel Ternary eRGO/NiO/α-Fe2O3 Nanostructured Photoanode with Enhanced Charge Transfer Properties for Efficient Solar Hydrogen Energy Conversion in a Photoelectrochemical Cell
Conference abstract · 23 Apr 2019
Optoelectronic diffusion waves in semiconductors: carrier lifetime chronotomography imaging of Si solar cells
Conference abstract · 13 Jul 2017
Organic and polymeric semiconductor materials for commercially useful dye-sensitized solar cells
Follow
New articles from what you follow go into your email digest, once you agree to alert emails.
- SubjectEnergy & Power
- SubjectEngineering
- SubjectMaterials Science
- BylineArticles whose byline prints “Sabiha Akter Monny”
