Conference abstract · 15 Oct 2018
Conference abstractPublished 2018
Mechanical and thermal properties of polyethylene modified with different natural fillers
Lublin University of Technology, Poland
Abstract
Select any words in the title or abstract, or press this and choose a sentence.
The interest in modified polymers, especially filled waste coming from renewable sources, and in their properties is still increasing because of a wide range of possible applications and a significant role in limiting the emission of CO2. The use of natural materials as fillers in thermoplastics brings both economic and environmental benefits. The study reports the results of an investigation of basic mechanical and thermal properties of low-density polyethylene modified with three types of natural fillers: wheat bran, pumpkin seed and peanut hulls obtained from food industry waste products. The mass content of the abovementioned fillers equaled from 0 to 20% relative to the matrix, while the grain size varied from 0 to 0.8 mm. The polyethylene used for studies was linear low-density polyethylene in the form of a powder of trade name Dowlex 2631.10EU, manufactured by the Dow Chemical Company. The paper reports the results of an investigation of the mechanical properties, i.e., strength properties determined by static tensile testing and hardness measurement, of injection molds produced at constant processing parameters. The dependences between tensile modulus, maximum tensile stress, tensile stress at yield, maximum tensile strain, tensile strain at yield as well as shore hardness and weight participation of powdered natural filler and grain size of the filler were defined. Out of thermal properties, vicat softening point and heat deflection temperature were determined.
Ask about this article
Answers come only from this article's title, abstract and keywords, each sentence pointing to where it comes from. Your question is sent to OpenAI to write the answer. Scholars Central does not store it.
Similar by topic
Conference abstract · 2021
"100 Nano-Stories: Bookmarked!" - Writing Publication of Thermal, Mechanical, Chemical, and Optical Properties In Aerogel Technologies And Advanced Materials
Conference abstract · 1 Apr 2020
Analysis of Mechanical and Thermal properties of the Hybrid Natural Rubber Biocomposites using nanofillers
Conference abstract
Experimental analysis of low density polyethylene effect on the mechanical properties of polyethylene vinyl acetate for prosthetic and orthotic application
Conference abstract · 2018
Influence of Mg-Ni-doped ZnFe2O3 incorporation on the structural, morphological and band gap properties of ultra-high-molecular-weight polyethylene
More from this journal
The newest in Journal of Nanomaterials & Molecular Nanotechnology.
Mini review · 24 Feb 2025
The Synthesis and Doping of Plant-Mediated Tin Oxide Nanoparticles and Its Applications
Short communication · 24 Dec 2024
Role of Nanomaterials in Environmental Remediation: Pollution Control and Water Purification
Opinion · 24 Dec 2024
Innovations in Nanomaterials: Connection between Research and Industry
Conferences in this field
Upcoming conferences in this field.
Follow
New articles from what you follow go into your email digest, once you agree to alert emails.
- JournalJournal of Nanomaterials & Molecular Nanotechnology
- SubjectNanotechnology
- SubjectGenetics & Molecular Biology
- BylineArticles whose byline prints “Janusz Wojciech Sikora”

