Scholars Central

Conference abstractPublished 2018

Noncontact structural damage sensing using nanocomposites and tomography

Authors: Kenneth J Loh

University of California-San Diego, USA

Ask about this article

Abstract

Select any words in the title or abstract, or press this and choose a sentence.

Aerospace and civil infrastructure components, particularly those built using fiber-reinforced polymer (FRP) composites, can suffer from subsurface damage modes that are difficult to detect and quantify during scheduled inspections. Subsurface damage includes matrix cracks, delamination, and manufacturing defects, such as voids, all of which has the potential to propagate during service and increase the risk for structural failure. In this study, a noncontact and noninvasive strain monitoring and damage localization technique are presented. Two components are needed. First, a patterned, passive, nanocomposite thin film was deposited and embedded in structural materials during component manufacturing. The embedded sensing element is passive in that it does not require any electrical connections to the thin film. In addition, the thin film was designed such that its electrical permittivity varied in response to applied strains. Second, an electrical capacitance tomography (ECT) algorithm and measurement system were implemented for mapping the permittivity distribution of cross-section of the film-enhanced FRP component. When the structure is undamaged, the embedded thin film’s strain response was close to zero, since it was deposited near its neutral axis. However, when damage occurs, the distribution of strain along the cross-section would change, and the film would change its electrical permittivity in response to strains induced. The ECT software-hardware system was used to nondestructively image the electrical properties of the component. It was shown that the strain-induced permittivity change of the film was successfully detected, and the location of damage could be localized using ECT. In addition, other damage modalities could be realized by embedding different types of films whose electrical permittivity is sensitive to different damage modalities. The vision is that the entire system can be miniaturized so that inspectors can scan structural components, visualize, and localize damage in real-time.

Ask about this article

Answers come only from this article's title, abstract and keywords, each sentence pointing to where it comes from. Your question is sent to OpenAI to write the answer. Scholars Central does not store it.

Try:

Similar by topic

More from this journal

The newest in Journal of Nanomaterials & Molecular Nanotechnology.

All its articles

Conferences in this field

Upcoming conferences in this field.

Follow

New articles from what you follow go into your email digest, once you agree to alert emails.

  • JournalJournal of Nanomaterials & Molecular Nanotechnology
  • SubjectNanotechnology
  • SubjectGenetics & Molecular Biology
  • BylineArticles whose byline prints “Kenneth J Loh”

For authors and organisers

Publish, present and keep up with your field

Find the right journal for your paper and submit your manuscript.

Photo: Pexels