Review article · 2013
Conference abstractPublished 2017
Waste to energy conversion using fast pyrolysis
National Institute of Technology, Tiruchirappalli, India
Abstract
Select any words in the title or abstract, or press this and choose a sentence.
Ever increasing energy demand, continued exploitation of fossil fuel sources, uncertainty in the cost of petroleum-based fuels and the detrimental effects related to the use of fossil fuels on the environment have encouraged to search new and alternate sources of fuel for automobiles. In recent years the quantity of waste has increased significantly all over the world. Most of the wastes are inorganic, non-biodegradable nature and affects the landfill, so waste disposal has been a major problem in most of the countries. The conversion of useful energy from wastes can be divided into thermo-chemical and biological conversion. Thermo-chemical conversions are more suitable for converting the inorganic wastes into useful energy. There are several thermo-chemical conversion routes available for converting the waste into energy, such as pyrolysis, gasification, and combustion. The fast pyrolysis has added advantage compared to gasification and incineration and promising way to obtain diesel like fuel from the wastes. Most of the research works reveal that the pyrolysis fuel has best replacement for the fossil fuel but it has slightly higher engine out emissions compared to fossil fuel. These emissions are major threat to human health and living organisms and it has been minimized by the advanced technologies. Common rail direct injection (CRDI) is one of the appropriate methods to reduction in the engine out emissions by and enhances the engine efficiency. The thermal efficiency increased upto 36 to 40% and unburnt hydrocarbons, particulate matters, and carbon monoxide emissions are reduced by 55%, 50%, and 60% respectively at rated power, but NO emission is increased by 20%. The quantity of EGR and mode of Split Injection are predominant methods for controlling the NOx emission. The high-pressure injection enhances the turbulence and homogeneity in the air-fuel mixture to obtain the better thermal efficiency as well as lower emissions.
Subjects
Energy & PowerAsk about this article
Answers come only from this article's title, abstract and keywords, each sentence pointing to where it comes from. Your question is sent to OpenAI to write the answer. Scholars Central does not store it.
Similar by topic
Conference abstract · 24 Jul 2017
Co-pyrolysis of polymer and biomass wastes: Energy production and environmental application
Conference abstract · 13 Nov 2025
Waste-to-energy conversion: Catalytic upgrading of municipal solid waste into green bio-oils
Conference abstract · 29 Aug 2016
Energy conversion of municipal solid wastes: Economical and technical feasibility
Short communication · 2021
A CFD study of biomass fast pyrolysis in a pilot-scale auger reactor- Salman Jalalifar- Australian Maritime College - University of Tasmania
More from this journal
The newest in Journal of Nuclear Energy Science & Power Generation Technology.
Short communication · 24 Jul 2025
Short Communication on Advanced Thermal Circuits for Complex Thermal Management
Research article · 22 Apr 2025
Study of The Indian Energy Consumption in Context to the GDP Growth: Using ARIMA and Factor Analysis
Research article · 4 Apr 2025
Performance, Emission, Vibration Investigation of Waste Chicken Fat Methyl Ester as Fuel and Diethyl Ether as Additive in IC Engine
Conferences in this field
Upcoming conferences in this field.
Follow
New articles from what you follow go into your email digest, once you agree to alert emails.
- JournalJournal of Nuclear Energy Science & Power Generation Technology
- SubjectEnergy & Power
- BylineArticles whose byline prints “R Anand”

