Editorial · 2020
Conference abstractPublished 2018
Graphene oxide-based organic memory transistors
Bangor University, UK University of Baghdad, Iraq
Abstract
Select any words in the title or abstract, or press this and choose a sentence.
In this work, graphene oxide-based organic memory transistors were fabricated and characterized. Graphene oxide (GO) was used as the fluting gate in all organic memory transistors. A cross-linked Polymethyl methacrylate (cPMMA) was used as the insulating layer, while TIPS-pentacene was used as the semiconductor. The gate electrode was fabricated from aluminum by thermally evaporation of a 50 nm film on a clean glass substrate, while the drain and source have been made by evaporating 50 nm of gold. After cleaning the glass substrate, insulating layer of 330 nm cPMMA was spin- coated with a spin speed of 2000 rpm. Drop-casting method was applied to produce a thin layer of Tips-pentacene semiconductor (3% toluene solution). For the floating gate nanoparticle, a thin layer of graphene oxide (4mg/ml water dispersion) was spincoated with a spin speed of 3500 rpm. The reference control transistor devices (without floating gate nanoparticle) were also fabricated with the same conditions. The electrical properties of the control transistor showed no or negligible hysteresis with very clear current-voltage (I-V) behavior. On the other hand, memory transistors showed high hysteresis and memory window which is increasing with increasing programming voltage. Adding nanoparticles as a floating gate results in such hysteresis which is considered to be from charging and discharging these nanoparticles with the applied programming voltage. The counter-clockwise direction of hysteresis is a clear indication that the nanoparticles floating gate can be charged through the semiconductor surface. To investigate the threshold voltage shift, different voltages pulses were applied to the gate resulting in a clear shift in the threshold voltage and it increased by increasing the pulse voltage. In addition, the charge retention was studied and it was shown that all the devices have non-volatile behavior.
Subjects
Pharmaceutical SciencesAsk about this article
Answers come only from this article's title, abstract and keywords, each sentence pointing to where it comes from. Your question is sent to OpenAI to write the answer. Scholars Central does not store it.
Similar by topic
Conference abstract · 28 Jun 2018
Fabrication of reduced graphene oxide-based conductive film for controlled drug delivery applications
Conference abstract · 2015
Fabrication of flexible, transparent, and skin-attachable field-effect transistor (FET) sensors based on graphene-silver nanowires
Conference abstract · 13 Jul 2017
Assessment of the antifouling effect of exopolysaccharides incorporated into copper oxide-based organic paint
Conference abstract · 27 Mar 2023
A novel robust hemostatic bandage based on mineral particles/graphene oxide-polymeric biomaterials
More from this journal
The newest in Journal of Pharmaceutics & Drug Delivery Research.
Research article · 12 Jun 2025
Melt-in-Mouth Miracles: A New Era of Drug Delivery with Mouth Dissolving Tablets
Research article · 20 Feb 2025
Sustained Drug Delivery in Pharmaceutical Dosage Forms for Novel Approaches of Formulation Design
Research article · 23 Jan 2025
Cutting Out Counterfeits: How Blockchain Can Revolutionize Drug Traceability?
Conferences in this field
Upcoming conferences in this field.
Follow
New articles from what you follow go into your email digest, once you agree to alert emails.
- JournalJournal of Pharmaceutics & Drug Delivery Research
- SubjectPharmaceutical Sciences
- BylineArticles whose byline prints “Amjad Alshawi”
- BylineArticles whose byline prints “Maysoon Alias”
- BylineArticles whose byline prints “Mohammed Mabrook”

