Scholars Central

Conference abstractPublished 7 Nov 2018

Microstructure and high temperature properties of Al rich diffusion zone on the surface of 9% Cr steel P92

Authors: Olga Tsurtsumia

Georgian Technical University, Georgia

Ask about this article

Abstract

Select any words in the title or abstract, or press this and choose a sentence.

The state of the art steam power plants operated on fossil fuels as well as renewable power generating systems require the wide range of the parts and the unites made of the high temperature resistant materials. It is known that one of the possible ways of increasing the overall efficiency of the plants in the course of reduction in the emission of carbon containing pollutants in the atmosphere is the rising of working temperatures in some of their critical segments. This, in its turn, requires modernization and optimization of the already existing HT materials. P92 is a commercially available ferritic/martensitic 9% Cr steel which is widely used in the power plants at the temperatures up to 600 OC, meeting all crucial requirements from the mechanical- and corrosion resistance standpoints. But the foreseen increased operating temperatures in the future power plants are envisaged to be far beyond those P92 steel was designed for. Improvement of the high temperature oxidation resistance of this steel through the application of Al coating by slurry method was successfully accomplished. HT discontinuous oxidation tests were performed on slurry aluminized and uncoated P92 samples in the laboratory atmosphere for 3000 hours at 650OC and 750OC. In contrast to the uncoated P92, which is a chromia former material, TGO on slurry aluminized steel P92 was found to be alumina. The considerable decrease in the oxide growth rate was detected on the aluminized samples at both oxidation temperatures. The microstructure of the Al diffusion zone and that of the protective oxide scale developed during long term HT experiments was comprehensively studied from the top surfaces and cross sections of samples. For that the SEM/EDS, FIB (slicing tomography mode), XRD and EPMA methods were complexly utilized

Ask about this article

Answers come only from this article's title, abstract and keywords, each sentence pointing to where it comes from. Your question is sent to OpenAI to write the answer. Scholars Central does not store it.

Try:

Similar by topic

Follow

New articles from what you follow go into your email digest, once you agree to alert emails.

  • BylineArticles whose byline prints “Olga Tsurtsumia”

For authors and organisers

Publish, present and keep up with your field

Find the right journal for your paper and submit your manuscript.

Photo: Pexels