Research article · 2018
Conference abstractPublished 7 Nov 2018
Properties of mechanically alloyed Fe-Al-Si alloys compacted by spark plasma sintering
University of Chemistry and Technology Prague, Czech Republic
Abstract
Select any words in the title or abstract, or press this and choose a sentence.
The Fe-Al-Si alloys are of interest due to their excellent properties including high hardness, strength, wear resistance and resistance against high-temperature oxidation. In many cases, the properties of such alloys are comparable or even outperforms the stainless steels or nickel super alloys. Since the chromium can be again considered as a critical raw material which shortage might influence a wide range of possible applications, the Fe-Al-Si-based alloys can be utilized as a viable substitution. The Fe80Al20Si20 (wt. %) alloys were prepared by mechanical alloying (MA) and compacted by spark plasma sintering (SPS) technique. The influence of either the conditions of MA and consequential compaction via SPS on the resulting microstructure, phase composition and mechanical properties was evaluated. For the mechanical alloying, the amount powder batch 5 or 20 g was tested in relation to the kinetics of phase’s formation as well onto the overall character of microstructure and mechanical properties. The compaction via SPS combined pre-loading prior to reaching compaction temperature and vice versa while current flow characteristic variations were also tested. Moreover, the high-temperature high-pressure compaction (HTHP) done at several orders of magnitude higher pressures of approximately 6 GPa was also tested. Based on the results, the proper conditions for mechanical alloying and consequential compaction were chosen to yield maxima of the materials.
Subjects
EngineeringPhysics & AstronomyAsk about this article
Answers come only from this article's title, abstract and keywords, each sentence pointing to where it comes from. Your question is sent to OpenAI to write the answer. Scholars Central does not store it.
Similar by topic
Research article · 2016
Synthesizing and Characterizing of a Novel Zr90Ni6Pd4 Bulk Metallic Glassy Alloy Obtained by Spark Plasma Sintering of Mechanically Alloyed Powders
Conference abstract · 13 Jul 2017
Special Talk: Highlight of spark plasma sintering effect through the structural study and luminescence properties of YNbO3:Eu3+
Conference abstract · 28 May 2018
Spark plasma semi-solid sintering: Bimodally grained high yield strength and ductility Ti-based alloys based on the eutectic transformation
Conference abstract · 11 Jun 2018
Microstructure and mechanical properties of Ti6AI4V /tin prepared by spark plasma sintering technique
Follow
New articles from what you follow go into your email digest, once you agree to alert emails.
- SubjectEngineering
- SubjectPhysics & Astronomy
- BylineArticles whose byline prints “Filip Prusa”
