Conference abstract · 29 Aug 2018
Conference abstractPublished 13 Aug 2018
Promising oxyborates for solid-oxide fuel cell applications
University of Nantes, France
Abstract
Select any words in the title or abstract, or press this and choose a sentence.
The research on solid oxide fuel cell (H+ or O2- SOFC) is based on both the synthesis of new materials and the design process of the cell. The main advantage of SOFC is that they can work under hydrocarbon fuel at temperature higher than ≈700°C. In the current SOFC systems, the most widely used electrolyte is yttria-stabilized zirconia (YSZ) which is inexpensive and shows an acceptable conductivity level. But YSZ is very refractory and its major drawback is its reactivity during the sintering process with lanthanum- and strontium-based cathode materials, which leads to the formation of an insulating layer such as SrZrO3 or La2Zr2O7. There is also a great interest to find ceramic based fuel cells, for mobile application, working at low temperature (≈400°C). This can be achieved in H+-SOFC with a ceramic membrane showing a good proton conductivity level. The state of the art perovskite type yttrium-doped BaCeO3 (called BCY) shows a proton conductivity level above 1 mS/cm at 400°C. But due to its high basicity, BCY tends to decompose, in this temperature domain, in air containing CO2. Finding new electrolyte material is one of the issues. In this presentation, after a briefly state-of-the art concerning SOFC electrolyte, we will report on high-temperature proton and oxide ion conductivities in two new class of oxyborates, La26O27(BO3)8 and doped Ba3Ti3O6(BO3)2 compounds. Both samples were prepared by solid-state reaction and characterized using x-ray diffraction and electrochemical impedance spectroscopy. Quite high conductivity level, about 6.8×10–4 and 1.5×10–4 S/cm at 700°C in air were observed respectively. The transport properties can be understood in terms of the presence in high concentrations of oxygen and barium vacancies as well as oxygen interstitials as observed in hybrid density-functional defect calculations.
Subjects
Energy & PowerAsk about this article
Answers come only from this article's title, abstract and keywords, each sentence pointing to where it comes from. Your question is sent to OpenAI to write the answer. Scholars Central does not store it.
Similar by topic
Conference abstract · 13 Jun 2016
Application of powder extrusion moulding technologies to fabrication of microtubes for solid oxide fuel cells
Research article · 28 Nov 2020
Feasibility Analysis for Power Generation from a Lab-made Intermediate Temperature-Solid Oxide Fuel Cell Using Liquid Alcohol Fuels
Conference abstract · 10 Sep 2019
Solar PV/T integrated reversible solid oxide fuel cell system for power generation and storage
Conference abstract · 11 Jan 2019
The effect of fabrication technique of thin film YSZ/GDC based bi-layer solid oxide fuel cell electrolyte
Follow
New articles from what you follow go into your email digest, once you agree to alert emails.
- SubjectEnergy & Power
- BylineArticles whose byline prints “Olivier Joubert”
