Scholars Central

Conference abstractPublished 4 Dec 2017

Sedimentation method for determining the content of soil fractions with diameters from 0.05 to 1.0 mm

Authors: Krzysztof Papuga, Jarosław Kaszubkiewicz

WrocÃ?Â?aw University of Environmental and Life Sciences, Poland

Ask about this article

Abstract

Select any words in the title or abstract, or press this and choose a sentence.

The most common methods used for determination of the granulometric composition of soils are based on the phenomenon of sedimentation. They use varying velocity of falling of soil particles in function of their substitution diameters. The existence of such dependence allows separates the particles of different dimensions in the process of their fall in the aqueous suspension. The sedimentation method has used only for particles less than 0.1 mm in diameter due to the shortfall time of larger particle sizes on the bottom of the vessel in which the sedimentation takes place. The proposed solution allows to circumvent this problem and determine even fractions up to 1 mm by sedimentation. In a vessel with water, a float (denser than water) is suspended onto a sensitive piezoelectric dynamometer. The use of such a dynamometer allows the density of the suspension to be measured at a predetermined depth. A layer of sand is added to the surface of the water (fractions from 0.05 to 1.0 mm) with a special device. Falling sand grains are separated by the effect described above and passing beside the float causes their apparent weight to drop, recorded by the measuring system connected to the dynamometer. The dependence of the apparent weight of the float on time allows calculating the content of different sand fractions. The amount and dimensions of the measured fractions depend on the geometry of the float and on the depth of its draft in the suspension. The correct algorithm requires the smoothing of the measuring curves. Appropriate summation of the calculated fractions enables the determination of the content of grains with diameters falling within the typical compartments used for the determination of granulometric composition. The method was tested for soil types with different granulation. The entire measurement lasts only about 100 seconds. The obtained results are satisfactory in accordance with the sieve method.

Ask about this article

Answers come only from this article's title, abstract and keywords, each sentence pointing to where it comes from. Your question is sent to OpenAI to write the answer. Scholars Central does not store it.

Try:

More from this journal

The newest in Journal of Geology & Geophysics.

All its articles

Conferences in this field

Upcoming conferences in this field.

Follow

New articles from what you follow go into your email digest, once you agree to alert emails.

  • JournalJournal of Geology & Geophysics
  • SubjectGeology and Earth Science
  • BylineArticles whose byline prints “Krzysztof Papuga”
  • BylineArticles whose byline prints “Jarosław Kaszubkiewicz”

For authors and organisers

Publish, present and keep up with your field

Find the right journal for your paper and submit your manuscript.

Photo: Pexels