Scholars Central

Conference abstract

Using multi-tip emitter devices to achieve increased and stable formulation atomization

Authors: Ekhoerose Valentine Onaiwu

Ask about this article

Abstract

Select any words in the title or abstract, or press this and choose a sentence.

Micro and nanoparticle engineering using the electrohydrodynamic atomization (EHDA) technology has received greater focus in recent years compared to other particle engineering methods due to its many advantages which includes greater particle size control and morphology alteration. This technology is based on the droplet formation which yield desired particle characteristics due to Taylor cone enablement at the nozzle tip. This study involved the utilization of a novel multi-tip emitter (MTE) device which was designed and engineered for possible EHDA up scaling. An active ketoprofen (KETO) was used in the formulation with a polymer matrix material polyvinylpyrrolidone (PVP) polymer. Ethanol and distilled water was used as vehicle for production of PVP polymer with ketoprofen (5% w/w of PVP). Physical property evaluation was carried out on resulting solution and electrospraying of formulation using both novel MTE and conventional single nozzle system at various flow rates. Ethanol and distilled water was used to prepare PVP polymer solution with ketoprofen (5% w/w of PVP) then physical properties were obtained for resulting formulations. Electrospraying was done using both novel MTE and conventional single needle device at different flow rates (5-300 ?l/min) and applied voltages (0-30 kV) applying various process parameters. X-ray diffraction (XRD), differential scanning calorimetry (DSC), scanning electron microscopy (SEM) and thermal gravimetric analysis (TGA) were used to analyze resulting particles. Digital optical camera recordings confirmed formation of stable jet at higher flow rates while electron micrograph confirmed stable jet derived more near uniform particles, particle size variation observed were due to nozzle head design. TGA, DSC, and XRD confirm encapsulated KETO molecules were dispersed in nanoparticles. In conclusion, the MTE enabled stable atomization at higher flow rates compared to the conventional single needle device. This indicates an exciting approach for scaling-up (EHDA) in contrast to current efforts focusing on multiple nozzle outlets.

Ask about this article

Answers come only from this article's title, abstract and keywords, each sentence pointing to where it comes from. Your question is sent to OpenAI to write the answer. Scholars Central does not store it.

Try:

Similar by topic

More from this journal

The newest in Pharmaceutica Analytica Acta.

All its articles

Conferences in this field

Upcoming conferences in this field.

Follow

New articles from what you follow go into your email digest, once you agree to alert emails.

  • JournalPharmaceutica Analytica Acta
  • SubjectPharmaceutical Sciences
  • BylineArticles whose byline prints “Ekhoerose Valentine Onaiwu”

For authors and organisers

Publish, present and keep up with your field

Find the right journal for your paper and submit your manuscript.

Photo: Pexels