Scholars Central

Review articlePublished 2014

Modeling Flow and Solute Transport in Irrigation Furrows

Authors: Charles A Sanchez, Zerihun D, Lazarovitch N, Warrick AW, Clemmens AJ, Bautista E

Irrigation & Drainage Systems Engineering

Volume 3 · Issue 2 · Pages 1–16

Ask about this article

Abstract

Select any words in the title or abstract, or press this and choose a sentence.

This paper presents an internally coupled flow and solute transport model for free-draining irrigation furrows. Furrow hydraulics is simulated with a numerical zero-inertia model and solute transport is computed with a numerical cross-section averaged advection-dispersion model. A procedure for integrating the furrow volumetric cumulative intake integral in the context of a hydraulic model is presented. Two hydraulic and solute transport data sets collected in sloping free-draining test furrows were used in model evaluation. Soil intake and hydraulic parameters were estimated with a simple approach that matches simulated and measured flow depth hydrographs. The field-scale Weighted Mean Relative Residual (WMRR) between measured and model predicted flow depth hydrographs are 22.0% and 29.0% for the two data set. Furthermore, it is shown that the WMRR of 29.0% reduces to 16.0%, when only the error associated with the downstream end computational node is excluded. This suggests that a significant fraction of the error is related to the form of the downstream boundary condition used. It also shows that the effect of the downstream boundary condition does not extend to a large segment of the flow upstream. The longitudinal dispersion coefficient is approximated with an explicit equation as a function of the hydraulic and geometric variables. Model evaluation is conducted in three steps: (1) cumulative intakes and intake rates computed with the numerical formulation presented here were compared with a subsurface flow model, HYDRUS-2D; (2) solute breakthrough curves computed with the coupled flow and transport model were compared with those from exact analytical solutions for applicable conditions; and (3) model predicted solute breakthrough curves were compared with those obtained from field measurements. Overall the results suggest that the coupled flow and transport model is a useful irrigation and fertigation system management and evaluation tool.

Subjects

Engineering

Ask about this article

Answers come only from this article's title, abstract and keywords, each sentence pointing to where it comes from. Your question is sent to OpenAI to write the answer. Scholars Central does not store it.

Try:

Similar by topic

More from this journal

The newest in Irrigation & Drainage Systems Engineering.

All its articles

Conferences in this field

Upcoming conferences in this field.

Follow

New articles from what you follow go into your email digest, once you agree to alert emails.

  • JournalIrrigation & Drainage Systems Engineering
  • SubjectEngineering
  • BylineArticles whose byline prints “Charles A Sanchez”
  • BylineArticles whose byline prints “Zerihun D”
  • BylineArticles whose byline prints “Lazarovitch N”
  • BylineArticles whose byline prints “Warrick AW”
  • BylineArticles whose byline prints “Clemmens AJ”
  • BylineArticles whose byline prints “Bautista E”

For authors and organisers

Publish, present and keep up with your field

Find the right journal for your paper and submit your manuscript.

Photo: Pexels