Conference abstract · 6 Oct 2014
Research articlePublished 2013
Physical Characterization and Microstructure Evaluation of Titanium Dioxide Semiconductor Discs Processed with Binders
Abstract
Select any words in the title or abstract, or press this and choose a sentence.
The processing of TiO2 semiconducting materials has a long route with numerous contributing variables. The binder plays an important role in the development of this electro-ceramic material. Higher density and strength of a green body are critical not only for handling at its green state but also to avoid the causes of flaw formation during sintering. Use of appropriate binder can lead to improve characteristics of powder which will reduce density gradient in the green body during compaction. Enhanced green properties can consequently lead to higher fired strength of the varistor discs. The binder system is anticipated to have an influence on the grain growth and microstructure which in turn affect the electrical performance. To investigate this phenomenon, TiO2 powder doped with 0.2% of Ta2O5 was processed with and without binder polyvinyl alcohol. The prepared samples were characterized by evaluating the physical properties like green density, fired density, axial and radial shrinkage, micro hardness and compressive strength. It was observed that TiO2 processed with binder exhibited better properties compared to powder processed without binder. The higher percent of binder enhanced the properties further. XRD revealed that the diffraction angle peak was similar to that of pure TiO2. SEM analysis indicated that the average grain size was larger for discs prepared with higher percent of binder. It is anticipated that the larger grain size will improve varistor properties in terms of low voltage applications.
Subjects
EngineeringMaterials ScienceAsk about this article
Answers come only from this article's title, abstract and keywords, each sentence pointing to where it comes from. Your question is sent to OpenAI to write the answer. Scholars Central does not store it.
Similar by topic
Research article · 2016
Improvement in Tensile Strength and Microstructural Properties of SAW Welded Low Alloy Steels by Addition of Titanium and Manganese in Agglomerated Flux
Research article · 2016
Study the Effect of Titanium Dioxide on Microstructure, Electrochemical Corrosion Parameters, Thermal Behavior and Internal Friction of Hexa Tin-Bismuth Based Alloy
Conference abstract · 22 Jun 2015
Undulator-like radiation and cooperative phenomena in semiconductor microstructures with grating
Conference abstract · 11 Jun 2018
Microstructure and electrochemical behaviour of ceramic reinforced titanium matrix composites fabricated by spark plasma sintering
More from this journal
The newest in Journal of Material Sciences & Engineering.
Article · 19 Feb 2026
Progress and Challenges in AlGaN/GaN HEMT-Based Bio sensing
Perspective · 29 Dec 2025
Nanostructured Thin Films: Advancing Next-Generation Electronics
Brief report · 29 Dec 2025
Microstructural Defects: Impact on Material Properties and Performance
Conferences in this field
Upcoming conferences in this field.
Follow
New articles from what you follow go into your email digest, once you agree to alert emails.
- JournalJournal of Material Sciences & Engineering
- SubjectEngineering
- SubjectMaterials Science
- BylineArticles whose byline prints “Shahida Begum”
- BylineArticles whose byline prints “MNM Ansari”
- BylineArticles whose byline prints “LM Keong”
- BylineArticles whose byline prints “T Velloo”

