Scholars Central

Conference abstract

Design and test a plowing appearance measurement device

Authors: Ali Abdulqader Mohammed Ali, Ahmed Abed Gatea Al-Shammary

Ask about this article

Abstract

Select any words in the title or abstract, or press this and choose a sentence.

Plowing appearance device was designed to calculate the number of clods per area after the tillage operation. This can be done by calculating tillage view using mechanical equipment through the generation of electrical impulses that are sent to an accurate control unit and compute the number of clods under required space and shows the results on the screen in order to see the tillage view per area. The device was designed and fabricated and then, an experiment was carried out by considering three factors: The first factor represents the forward speed of tractor at three levels (3.5, 4.5, 5.5 km/h) and the second factor represent soil moisture content at two levels (14%, 20%) and the third factor denote tillage depth of three levels (10, 15, 20 cm) to the clay loam in Wasit cities in Iraq. A split-split plot design technique with three replications was used in this research. The results were shown, that significant differences in the forward speed of the tractor on tillage view for more than 10 cm clod size. The forward speed of 5.5 km/h recorded the less number of clods of more 10 cm clod size, while not significant effect shown for the forward speed on the tillage view used in the traditional method of clod numbers computing. Additionally, the tillage depth of 10 cm shown least number of clods (which has more than 10 cm diameter) at 6.753, 6.9633 mass/m2 by using the plowing view device and traditional method, respectively, while the results recorded that the plowing at depth 20 cm shown a highest clods number at 11.000, 10.920 mass/m2 using plowing view device and the traditional methods, respectively. From the obtained results, it can be conclude that there is significant difference in the results and results are more accurate using plowing view device when compared to traditional methods.

Ask about this article

Answers come only from this article's title, abstract and keywords, each sentence pointing to where it comes from. Your question is sent to OpenAI to write the answer. Scholars Central does not store it.

Try:

Follow

New articles from what you follow go into your email digest, once you agree to alert emails.

  • JournalAgrotechnology
  • SubjectAgriculture, Food & Aqua
  • BylineArticles whose byline prints “Ali Abdulqader Mohammed Ali”
  • BylineArticles whose byline prints “Ahmed Abed Gatea Al-Shammary”

For authors and organisers

Publish, present and keep up with your field

Find the right journal for your paper and submit your manuscript.

Photo: Pexels