Research article · 2018
Conference abstractPublished 2018
Highly flat optical frequency comb generation based on passive modulation devices
Myongji University, Korea
Abstract
Select any words in the title or abstract, or press this and choose a sentence.
Optical frequency combs (OFCs) with high spectral flatness and stability are ready for various applications, such as dense wavelength division multiplexing systems, optical orthogonal frequency division multiplexing systems, Radio over fiber systems. ultra-broadband RF signal generation, and microwave photonic filters. In this presentation, we propose a novel scheme to generate a large number of spectral lines within small spectral flatness by employing a dual parallel Mach-Zehnder modulator (DP-MZM) and phase modulators. Our method removes the requirement of a quasi-quadratic signal for phase modulation, by shaping narrow and flat-topped intensity pulse by properly operating a DP-MZM. To achieve output pulses, one (MZM 1) of the DP-MZM is biased at higher voltage than Vπ/2 and fully sinusoidal modulated. However, the high bias voltage induces low power side lobes and sinusoidal (not flat) shape at top. Next, a sinusoidal signal at the double frequency 2ωRF is applied to the other modulator (MZM 2) to produce the similar output to the side lobes of the MZM 1 output. Next, to remove the side lobes of the MZM 1 output, we add the MZM 1 and 2 outputs at out of phase. This side lobe cancelling process also flattens the top of the combined pulse signal. The shaped pulse fits within the quadratic period of the sinusoidal signal to drive the phase modulators, allowing strong frequency chirp. Hence, it allows widening of the frequency spacing without strict requirements to maintain a quasi-quadratic signal which requires high power RF amplifiers with large bandwidths to sustain the second harmonic signals. Based on suggested method we achieve 35 comb lines with less than 1 dB flatness (see the following figure), and extend the setup to obtain the 54 lines with 1.6 dB flatness by adding another phase modulator. Finally, we obtain 58 lines within 1.5 dB flatness by simply increasing the operating frequency from 10 GHz to 12 GHz. [Acknowledgment: This work was supported by the Civil Military Cooperation Center funded by the Ministry of Defense (#17DB1500) and by the IIT P(#2014-0-00501) and KRF (#2016R1D1A1B04930224) funded by the Ministry of Science and ICT.]
Subjects
Physics & AstronomyAsk about this article
Answers come only from this article's title, abstract and keywords, each sentence pointing to where it comes from. Your question is sent to OpenAI to write the answer. Scholars Central does not store it.
Similar by topic
Conference abstract · 15 Nov 2017
Technique of optical frequency comb generation from a bismuth-based harmonically mode-locked fi ber laser
Conference abstract · 15 Nov 2017
Technique of optical frequency comb generation from a bismuth-based harmonically mode-locked fiber laser
Conference abstract · 28 Nov 2016
The radio frequency photomultiplier tube and optical frequency comb: High resolution, high rate and highly stable timing technique for single photons
Conference abstract · 2018
Optical frequency comb generation utilizing Mach-Zehnder modulator and multi-laser sources
More from this journal
The newest in Research Journal of Optics and Photonics.
Perspective · 22 Jan 2024
Ultrafast Optics: Unlocking High-Speed Phenomena with Femtosecond Laser Pulses
Commentary · 22 Dec 2023
Nanophotonics: Shaping the Future of Optical Technologies
Commentary · 22 Dec 2023
From Photons to Electrons: The Evolution of Optoelectronics
Conferences in this field
Upcoming conferences in this field.
Follow
New articles from what you follow go into your email digest, once you agree to alert emails.
- JournalResearch Journal of Optics and Photonics
- SubjectPhysics & Astronomy
- BylineArticles whose byline prints “Dongsun Seo”
