Research article · 2017
Conference abstractPublished 15 Oct 2018
Nanoparticles for soft ferrites: Influence on sintered microstructure
Jaume I University, Spain
Abstract
Select any words in the title or abstract, or press this and choose a sentence.
Cu-doped NiZn ferrites are typical electromagnetic wave absorbers which absorption capacity (calculated from experimental measures of complex permeability and complex permittivity for a given frequency range) is related to thickness body and especially and more critical to its microstructure. Ideal microstructure would consist of sintered bodies with no porosity, small average grain size and narrow grain size distribution. Moreover, the finer grain sizes the better absorption capacity. Literature shows that physical properties of ceramic bodies improve when particle-size distribution decreases from the micro-scale to the nanoscale. Ferrites from nanoparticles have been sintered controlling average grain size and relative density with sintering temperature. Green microstructure has been set constant using uniaxial dry pressing at 200 MPa as the shaping method. Sintered microstructure has been observed by Scanning Electron Microscopy (SEM), obtaining the average grain size by image analysis of the SEM micrographs. Relative density was determined by the Archimedes method, using true density material value. Magnetic permeability was measured in the frequency range from 1 MHz to 3 GHz by using an Agilent model E4991 ARF impedance analyzer with the 16454A test fixture and this later parameter has been related to average grain size and relative density. Finally, the results obtained from nano-particulate ferrite powder have been compared with those previously obtained from micro-particulate ferrite powders, noting an improvement in performance.
Subjects
NanotechnologyAsk about this article
Answers come only from this article's title, abstract and keywords, each sentence pointing to where it comes from. Your question is sent to OpenAI to write the answer. Scholars Central does not store it.
Similar by topic
Research article · 18 Jan 2019
Influence of Sintering Time on Structural Behaviour of Copper Ferrite Nanoparticles
Research article · 9 Mar 2015
Effect of Sintering Temperature on the Structural Magnetic and Electrical Properties of Zinc Ferrite Samples
Conference abstract · 20 Nov 2020
Microstructure and Mechanical proferties of composite material used scrap aluminium can and waste glass fabricated by Spark Plasma Sintering
Conference abstract · 29 Aug 2020
Controlling sintering to obtain nano/submicronic microstructures: from the modeling to advanced approaches like flash sintering/synthesis
Follow
New articles from what you follow go into your email digest, once you agree to alert emails.
- SubjectNanotechnology
- BylineArticles whose byline prints “Carolina Clausell Terol”
