Research article · Mar 2013
Conference abstract
Lightweight concrete containing recycled plastic aggregates
University of Birmingham, UK King Saud University, KSA
Abstract
Select any words in the title or abstract, or press this and choose a sentence.
Concrete industry needs millions of tons of aggregate comprising natural sands and gravels each year. In recent years there is an increasing trend to use recycled aggregate with a view to saving natural resources and to produce lightweight concrete. With this in mind a study was undertaken to produce a recycled plastic aggregate (RPA) from easily available materials such as waste plastic and fillers such as red sand. A laboratory study was undertaken to investigate the physical properties of RPA. Also concrete compressive strength and durability, latter in terms of chloride migration were investigated. Results for two w/c ratios with 100% replacement of conventional lightweight aggregate (LWA) with recycled plastic aggregate (RPA) showed that reduction in strengths of about 50% and about 13% reduction in chloride penetration. Nonetheless, strengths of 12 to 15MPa were achieved, and thus it is possible for this aggregate to be used in areas where low strengths are required, such as low side building cementations backfill and others.
Subjects
EngineeringMaterials ScienceAsk about this article
Answers come only from this article's title, abstract and keywords, each sentence pointing to where it comes from. Your question is sent to OpenAI to write the answer. Scholars Central does not store it.
Similar by topic
Review article · 3 Jan 2023
Investigating the Effects of Bacteria and Heat on the Compressive Strength of Lightweight Concrete
Commentary · 28 Feb 2025
Fabrication of Lightweight Hybrid Composites Using Recycled Industrial Fibers
Research article · 14 Mar 2024
Comparative Study on Properties of Recycled Aggregate Concrete Using Recycled Aggregates Coated with Different Pozzolanic Materials
Brief report · 12 Mar 2022
Properties of Recycled Aggregate Concrete
More from this journal
The newest in Journal of Material Sciences & Engineering.
Article · 19 Feb 2026
Progress and Challenges in AlGaN/GaN HEMT-Based Bio sensing
Perspective · 29 Dec 2025
Nanostructured Thin Films: Advancing Next-Generation Electronics
Brief report · 29 Dec 2025
Microstructural Defects: Impact on Material Properties and Performance
Conferences in this field
Upcoming conferences in this field.
Follow
New articles from what you follow go into your email digest, once you agree to alert emails.
- JournalJournal of Material Sciences & Engineering
- SubjectEngineering
- SubjectMaterials Science
- BylineArticles whose byline prints “Fahad K Alqahtani”
- BylineArticles whose byline prints “Gurmel Ghataora”
- BylineArticles whose byline prints “M Iqbal Khan”
- BylineArticles whose byline prints “Samir Dirar”

