Conference abstract · 9 Mar 2022
Conference abstractPublished 6 Oct 2014
Stable glass-ceramic composites a compliant seals for SOFCs
Abstract
Select any words in the title or abstract, or press this and choose a sentence.
In order to develop compliant seal systems for SOFCs operating in the temperature range of 800-950°C, this project has focused on iterations in materials systems. The materials consisting of composites of a base glass with appropriate ceramic components in order to identify a stable sealing system with adequate and acceptable thermal characteristics, such as, the viscosity and coefficient of thermal expansion. Appropriate viscosity was targeted to ensure good flow behavior of the glass at temperatures where fuel cells operate and sealing effects are required. Viscosity variation in the composites was brought about by the selection of ceramic additives; a large number of candidates ranging from phase pure alumina, magnesia, ceria and barium zirconate, to ceria doped with 10 mole % gadolinium oxide (GDC). SCN1 glass (trade name of sealing glass developed by SEM-COM) was used as the base component, whose composition was such as to provide a CTE match with the SOFC system (in the RT-Tg range), when composited with a second ceramic phase. Additives in both nano- and micro-scale dimensions (as fine powders or in the form of fibers) were introduced mainly to block the bubbles from moving but also to make the composite structure stronger. In addition, their role was also to inhibit the growth of air bubbles within the glass matrix and to or prevent their coalescence during long soak-time at 850°C, with the goal of eliminating or minimizing the CTE drift in the resultant glass composition. No reaction between SCN1 glass and the GDC additives was discerned. Moreover, the bubbles remained small and did not move or coalesce. The CTE of the GDC composites was very close to the targeted value and not change significantly when aged up to 232 h at 850°C in air.
Subjects
EngineeringMaterials ScienceAsk about this article
Answers come only from this article's title, abstract and keywords, each sentence pointing to where it comes from. Your question is sent to OpenAI to write the answer. Scholars Central does not store it.
Similar by topic
Conference abstract · 26 Jun 2017
Glass-ceramic composites from the extrinsic to the intrinsic point of view
Conference abstract · 17 Aug 2015
Development of bi-layered glass-ceramic sealant for solid oxide fuel cells (SOFCs)
Short communication · 15 Jun 2021
Thermal cyclic life of glass-ceramic bonded thermal barrier coating system
Conference abstract · 19 Feb 2018
Novel phosphate glass-ceramics and particles-containing phosphate glasses
More from this journal
The newest in Journal of Material Sciences & Engineering.
Article · 19 Feb 2026
Progress and Challenges in AlGaN/GaN HEMT-Based Bio sensing
Perspective · 29 Dec 2025
Nanostructured Thin Films: Advancing Next-Generation Electronics
Brief report · 29 Dec 2025
Microstructural Defects: Impact on Material Properties and Performance
Conferences in this field
Upcoming conferences in this field.
Follow
New articles from what you follow go into your email digest, once you agree to alert emails.
- JournalJournal of Material Sciences & Engineering
- SubjectEngineering
- SubjectMaterials Science
- BylineArticles whose byline prints “M H Imanieh”

