Conference abstract · 6 Oct 2014
Conference abstractPublished 6 Oct 2014
Enabling manufacturing composite cathodes through aqueous processing for lithium-ion batteries
Abstract
Select any words in the title or abstract, or press this and choose a sentence.
Production of lithium-ion batteries (LIBs) is foreseen to grow dramatically with their application to electric vehicles (EVs). However, LIBs cost for all EVs is currently between $325-$500/kWh and the target cost is set at $125/kWh by EV everywhere. Majority of the battery cost comes from material and associated processing. This talk will discuss manufacturing LIB electrodes through aqueous processing, which induces significant cost reduction and is more environmental benign. For conventional LIBs, manufacturing of composite electrodes involves a slurry process in which the active material is mixed with other additives in a solvent, typically N-methyl-2-pyrrolidone (NMP). The high NMP cost and expensive NMP recovery add significant manufacturing cost to the LIB pack. A cost reduction in switching manufacturing electrodes from NMP to aqueous processing will be discussed. Replacing NMP with water induces some problems, including dispersion stability due to the interaction between particles, poor electrode wetting on current collectors due to the high surface tension of aqueous dispersion, etc. Strategies to tackle such problems and enable aqueous processing for electrode manufacturing will be addressed and some examples will be provided.
Subjects
EngineeringMaterials ScienceAsk about this article
Answers come only from this article's title, abstract and keywords, each sentence pointing to where it comes from. Your question is sent to OpenAI to write the answer. Scholars Central does not store it.
Similar by topic
Short communication · 18 Dec 2020
Advanced Materials 2019: Structural investigation of Si nanoparticles-carbon nanofiber composite as flexible anode for highrate lithium-ion batteries- Vahide Ghanooni Ahmadabadi, Deakin University
Conference abstract · 19 Aug 2019
Structural investigation of Si nanoparticles-carbon nanofiber composite as flexible anode for high-rate lithium-ion batteries
Conference abstract · 19 Aug 2019
Structural investigation of Si nanoparticles-carbon nanofiber composite as flexible anode for highrate lithium-ion batteries
Conference abstract · 25 Jun 2018
Synthesis of cobaltic oxide/carbon nanotube/graphene composites for anode materials of lithium-ion batteries
More from this journal
The newest in Journal of Material Sciences & Engineering.
Article · 19 Feb 2026
Progress and Challenges in AlGaN/GaN HEMT-Based Bio sensing
Perspective · 29 Dec 2025
Nanostructured Thin Films: Advancing Next-Generation Electronics
Brief report · 29 Dec 2025
Microstructural Defects: Impact on Material Properties and Performance
Conferences in this field
Upcoming conferences in this field.
Follow
New articles from what you follow go into your email digest, once you agree to alert emails.
- JournalJournal of Material Sciences & Engineering
- SubjectEngineering
- SubjectMaterials Science
- BylineArticles whose byline prints “Jianlin Li”
- BylineArticles whose byline prints “David Wood”
- BylineArticles whose byline prints “Claus Daniel”

