Conference abstract · 25 Jun 2018
Conference abstractPublished 7 Oct 2013
Flame retardant nanocomposites for engineering application
Abstract
Select any words in the title or abstract, or press this and choose a sentence.
Addition of flame-retardant material to polymer will increase resistance of material to ignition, suppress propagation of flame and reduces spread of flames with minimal degradation of the polymer properties. A novel graft copolymer of tris (2-methoxy ethoxy) vinylsilane (TMEVS) onto ethylene propylene diene terpolymer (EPDM) has been developed by grafting TMEVS using dicumyl peroxide as an initiator (EPDM-g-TMEVS) in a brabender plasticorder. Grafting of TMEVS onto EPDM was ascertained using FTIR. Suitable interfacial compatibilizer was synthesized by grafting of HDPE with glycidyl methacrylate (HDPE-g-GMA) with benzoyl peroxide as initiator. The EPDM-grafted-TMEVS developed was blended with different weight percentage of HDPE and nanoclay. Different blend systems were prepared with varying amount of nanoclay (0-10% w/w %) and compatibilizer. The blends were analyzed for its thermal, mechanical, electrical, flame and morphological properties. The effect of nanoclay and the synergy with the compatibilizer on different properties of blends is studied accordingly and discussed. The results of the characterization indicated that the mechanical properties of the blends improved significantly with the addition of nanoclay and compatibilizer. However no improvement in the hardness value was observed upon addition of nanoclay and compatibilizer. The composition dependence of the blends tensile strength in presence of nanoclay and compatibilizer was assessed using suitable mathematical models and it was observed that from the Turcsanyi model the compatibilized blends exhibited an improved interfacial adhesion and so the improved tensile strength. Further the improved interfacial adhesion was also assessed and confirmed by high resolution electroscope (SEM and TEM) images.
Subjects
EngineeringMaterials ScienceAsk about this article
Answers come only from this article's title, abstract and keywords, each sentence pointing to where it comes from. Your question is sent to OpenAI to write the answer. Scholars Central does not store it.
Similar by topic
Conference abstract · 22 Jun 2020
Phosphorous-jointed epoxidized soybean oil and rice husk-based silica as the novel additives for improvement mechanical and flame retardant of epoxy resin
Research article · 2018
Fabrication of Oil Palm Fibre Polymer Composite Panel: Impact of Hybridized Flame Retardant Formulations on Thermo-Mechanical Properties
Conference abstract · 22 Aug 2016
Dual purpose Schiff base complexes for DSSC dye and polymer flame retardant
Conference abstract · 25 Jul 2016
The complexing in copper(II) salt (flame retardant) - polyamine (hardener) system as an effective way to the combustibility decrease of epoxy-amine polymeric materials
More from this journal
The newest in Journal of Material Sciences & Engineering.
Article · 19 Feb 2026
Progress and Challenges in AlGaN/GaN HEMT-Based Bio sensing
Perspective · 29 Dec 2025
Nanostructured Thin Films: Advancing Next-Generation Electronics
Brief report · 29 Dec 2025
Microstructural Defects: Impact on Material Properties and Performance
Conferences in this field
Upcoming conferences in this field.
Follow
New articles from what you follow go into your email digest, once you agree to alert emails.
- JournalJournal of Material Sciences & Engineering
- SubjectEngineering
- SubjectMaterials Science
- BylineArticles whose byline prints “R. Suresh”
- BylineArticles whose byline prints “Divya V. C”
- BylineArticles whose byline prints “R. R. N. Sailaja”
- BylineArticles whose byline prints “V. V. Pattanshetti”

