Conference abstract · 19 Feb 2018
Conference abstractPublished 8 Jun 2017
High temperature H2S adsorption using copper-titanate nanoparticles
University of Alberta, Canada
Abstract
Select any words in the title or abstract, or press this and choose a sentence.
Direct desulfurization of syngas is an important measure to further increase the efficiency of IGCC systems. Solid-phase, metal oxide adsorbents which sequester the sulfur by converting H2S to a metal sulfide are the only desulfurization technology capable of withstanding the combustion temperatures present at the outlet of the gasifier. Copper oxide is of particular interest due to its favorable thermodynamics across a wide range of temperatures. Cu-ETS-2 is a copper exchanged form of the sodium titanate ETS-2 and functions analogously to CuO for the conversion of H2S into CuS at temperatures ranging from ambient to 950 Ã?°C. The results of this study show that Cu-ETS-2 is capable of removing H2S from H2S/He mixture to concentrations below a mass spectrometerâÂ?Â?s detection limit at temperatures as high as 950 Ã?°C. Temperature is, however, only one of the challenges facing a direct desulfurization adsorbent; high concentrations of H2 and water vapor are present in the syngas stream which can influence the oxidation state of the metal and the efficiency of H2S removal. In an attempt to prevent reduction of CuO, chromium was successfully used to stabilize the oxidation state of copper oxide and maintain constant adsorption capacity throughout the whole temperature range. While several studies have examined the effect hydrogen in the feed, there are few studies exploring the influence of water vapor on the efficiency of H2S removal and none that explore the effect of water vapor at elevated temperatures. This study can be considered the only study to investigate the influence of water vapor on the desulfurization of a dilute H2S stream at temperatures between 350 and 950 Ã?°C using copper oxide-based adsorbents. The findings demonstrate that the presence of water vapor promotes production of H2, resulting in faster reduction of CuO to Cu2O and elemental copper, leading to less adsorption capacity. Finally, the ability of the adsorbent for regeneration and use as a multi-cycle adsorbent was investigated. The results indicate that the adsorbent is capable of regeneration for at least four times with no sign of reduction in capacity. The results also indicate that the exothermic nature of oxidation reaction results in temperatures up to ~1700 Ã?°C causing the partial melting of the quartz glass tube. However the adsorbent can withstand such high temperatures and does not lose adsorption capacity after the first oxidation step. This phenomenon is due to having nano titanate ETS-2 as the support in the adsorbent.
Subjects
ChemistryEngineeringAsk about this article
Answers come only from this article's title, abstract and keywords, each sentence pointing to where it comes from. Your question is sent to OpenAI to write the answer. Scholars Central does not store it.
Similar by topic
Research article · 2013
Removal of Copper from Phosphoric Acid by Adsorption on Tunisian Bentonite
Research article · 2012
Adsorption of Copper Complexes on Anion Exchange Resin in Non-Ammoniacal and Ammoniacal Thiosulfate Leaching Systems
Opinion · 3 May 2023
Evaluation of Column Hg Adsorption on High-Temperature Activated Carbon
Research article · 20 Jul 2020
Column Studies on Adsorption of Hg(II) on Chemically Activated High Temperature Syzygium jambolanum Nut Carbon
More from this journal
The newest in Industrial Chemistry.
Opinion · 1 Dec 2025
Advancements in Sustainable Chemical Manufacturing and Digitalization
Short communication · 1 Dec 2025
Industrial Chemical Regulations: Global Harmonization, Sustainability, Innovation
Short communication · 1 Dec 2025
Enhancing Industrial Energy Integration: A Holistic Approach
Conferences in this field
Upcoming conferences in this field.
Follow
New articles from what you follow go into your email digest, once you agree to alert emails.
- JournalIndustrial Chemistry
- SubjectChemistry
- SubjectEngineering
- BylineArticles whose byline prints “Farzad Yazdanbakhsh”
