Conference abstract · 14 Sep 2015
Conference abstractPublished 7 Oct 2013
Characterization study of functionally graded metal ceramic composites fabricated by layer processing technique
Abstract
Select any words in the title or abstract, or press this and choose a sentence.
Functionally graded materials are a ceramic metal composite which transition from metal on one face to ceramic on the opposite face. In a functionally graded material both the composition and the structure gradually change over the volume, resulting in corresponding changes in the properties of the materials. When two dissimilar materials (e.g. metal and ceramic) with large difference in material properties are bonded, large leap in the plane normal stresses and high-transverse shear stresses occur at the interface during fabrication and operation. This leads to decohesion at the metal-ceramic interface and low load- bearing performance. Functionally graded materials provide a solution to this problem. In this content multilayered functionally graded materials (FGMs) systems are designed, synthesized and characterized considering 10, 20, 30 and 40 vol. % ceramic concentrations. Multi layered FGMs are fabricated into flat beam samples by layer processing technique. Porosity content, micro structural studies and micro hardness are determined. Thermal properties (thermal fatigue behavior and thermal shock resistance) are also evaluated for functionally graded materials. Material used for this research is Al/SiC and Ni/Al 2 O 3 .
Subjects
EngineeringMaterials ScienceAsk about this article
Answers come only from this article's title, abstract and keywords, each sentence pointing to where it comes from. Your question is sent to OpenAI to write the answer. Scholars Central does not store it.
Similar by topic
Research article · 2015
Fabrication of Functionally Graded Carbon Nanotube-Reinforced Aluminium Matrix Laminate by Mechanical Powder Metallurgy Technique - Part I
Conference abstract · 25 Jul 2016
Processing of metal-ceramic composites using microwave heating
Research article · 2012
Characterization of Fabricated A 384.1-MgO Based Metal Matrix Composite and Optimization of Tensile Strength Using Taguchi Techniques
Research article · Aug 2014
Synthesis and Characterization of Al-SiC Functionally Graded Material Composites Using Powder Metallurgy Techniques
More from this journal
The newest in Journal of Material Sciences & Engineering.
Article · 19 Feb 2026
Progress and Challenges in AlGaN/GaN HEMT-Based Bio sensing
Perspective · 29 Dec 2025
Nanostructured Thin Films: Advancing Next-Generation Electronics
Brief report · 29 Dec 2025
Microstructural Defects: Impact on Material Properties and Performance
Conferences in this field
Upcoming conferences in this field.
Follow
New articles from what you follow go into your email digest, once you agree to alert emails.
- JournalJournal of Material Sciences & Engineering
- SubjectEngineering
- SubjectMaterials Science
- BylineArticles whose byline prints “Kumar R”

