Scholars Central

Conference abstractPublished 9 Nov 2017

Structure dependent selection criterion of natural accelerogram sets for non-linear time history analysis

Authors: Piero Colajanni

University of Palermo, Italy

Ask about this article

Abstract

Select any words in the title or abstract, or press this and choose a sentence.

Non-linear response history analysis (NRHA) represents nowadays the more accurate method for prediction of the seismic response of structures because it incorporates in the analysis model the non-linear material and geometry behavior. In NRHA a key issue is the input modeling. A research aiming to find out a selection criterion for different sets of accelerograms, all of them satisfying the spectrum compatibility criteria imposed by the code, that enable a reliable assessment of the seismic demand is performed. The analysis is based on a preliminary evaluation of correlation among parameters for ground motion intensity measure (IM) and cinematic, energetic and damage parameters describing structure nonlinear responses. To this aim, a modified expression of the effective peak acceleration (EPA) is proposed, defined over the range of structure fundamental period referring to undamaged and damaged model would help this recognition. Subsequently, a method of selecting accelerograms has been proposed, able to take into account the two components of each seismic accelerations capable of providing sets of accelerometers compatible with a predetermined response spectrum and which effects on the analyzed structure are individually consistent with the seismic intensity presented by the spectrum. The selection criterion for accelerogram sets is based on the minimum value of the coefficient of variation (CoV) of the EPA. It reduces the dispersion of the effects of each accelerograms on the structure that has to analyze or designed, that is one of the most relevant drawbacks of the selection criterion available in literature. Validation of the criterion is carried out analyzing the response of the three plane multi-stored moment resisting frames (MRFs) to a set of 60 different accelerograms and analyzing the value of the correlation coefficient between input intensity measure and structure response parameters. The effectiveness of a selection criterion is proved by evaluation of average values and COV of NRHA response parameters of MRFs. References 1. Amiri G G, Dana F M (2004) Introduction of the most suitable parameter for selection of critical earthquake. Computer and Structures; 83: 613-626. 2. Baker J, Cornell C A (2006) Spectral shape: epsilon and record selection. Earthquake Engineering and Structural Dynamics; 32: 1077-95. 3. Bommer J J, Acevedo A B (2004) The use of real earthquake accelerograms as input to dynamic analysis. Journal of Earthquake Engineering; 8(1): 43-91. 4 .Elenas A, Meskouris K (2001) Correlation study between seismic acceleration parameters and damage indices of structures. Engineering Structures; 23: 698-704. 5. Evangelos I Katsanos, Anastasios G Sextos, George D Manol (2009) Selection of earthquake ground motion records: A state-of-the-art review from a structural engineering perspective. Soil Dynamics and Earthquake Engineering; 30: 157-169.

Subjects

Engineering

Ask about this article

Answers come only from this article's title, abstract and keywords, each sentence pointing to where it comes from. Your question is sent to OpenAI to write the answer. Scholars Central does not store it.

Try:

More from this journal

The newest in Journal of Steel Structures & Construction.

All its articles

Conferences in this field

Upcoming conferences in this field.

Follow

New articles from what you follow go into your email digest, once you agree to alert emails.

  • JournalJournal of Steel Structures & Construction
  • SubjectEngineering
  • BylineArticles whose byline prints “Piero Colajanni”

For authors and organisers

Publish, present and keep up with your field

Find the right journal for your paper and submit your manuscript.

Photo: Pexels