Conference abstract · 19 Oct 2017
Conference abstractPublished 19 Oct 2017
On-chip plasmonic modulator
The American University in Cairo, Egypt
Abstract
Select any words in the title or abstract, or press this and choose a sentence.
Surface plasmon polaritons SPPs are electromagnetic waves generated at the interface between a dielectric and a high electron density material such as metals. The field of manipulating and dealing with such distinguished electromagnetic waves is known as the field of plasmonics. The most significant properties of plasmonics are the ability of confining the electromagnetic energy to beyond the classical diffraction limit, and the enhancement of the electromagnetic fields as for example in the metaldielectric-metal slot. So, plasmonics offer the miniaturization of photonic components to nano-scales that were not possible to achieve using the conventional silicon photonics platform. Since plasmonic components are in the nano-scale, then, plasmonics which enable the integration of the photonic and electronic components on the same chip since they have comparable sizes. Distinct applications based on plasmonics have been successfully produced and studied such as sensors1-3, filters, multiplexers, interferometers, and modulators. The modulator is one of the most significant components in telecommunication devices. Since silicon weak nonlinear electro-optic effects, its modulation ability is very poor. However, plasmonics have shown the ability to integrate high nonlinear electro-optic polymers EOPs with plasmonic components to produce high performance plasmonic modulators4-8. Such modulators have the advantages of high speed operation and minimized device size. In this paper, we introduce an on-chip plasmonic modulator, which is characterized by its high modulation depth, low power consumption, and small footprint. The modulator is based on the ring resonator mechanism the structure is built from a stack of five layers above a SiO2 substrate. The layers are built as Si-EOP-metal-EOP-Si. Upon applying a small voltage across the EOP layers, the EOP changes its refractive index, so the plasmonic mode changes its effective index value, this results in a change of the resonant wavelength/frequency in the ring resonator. Fig.1 shows the shift of the resonant wavelength due to an application of voltage of only 1.3V. This wavelength shift can be understood as a change in level of the transmitted power, thereby can be viewed as optical modulation..
Subjects
EngineeringMaterials ScienceAsk about this article
Answers come only from this article's title, abstract and keywords, each sentence pointing to where it comes from. Your question is sent to OpenAI to write the answer. Scholars Central does not store it.
Similar by topic
Conference abstract · 19 Oct 2017
Hybrid plasmonic electro-optical ring resonator based modulator based on electrically tuning the ITO’s properties
Research article · Feb 2015
Reliable Low Power CMOS Image Sensor with On-Chip Image Compression and Encryption with FPGA Implementation
Research article · Jun 2014
Design and Implementation of an On-Chip Permutation Network for Multiprocessor System-On-Chip
Research article · Apr 2014
Minimization of Area & Power Communication Path for On-Chip Networks
More from this journal
The newest in Journal of Material Sciences & Engineering.
Article · 19 Feb 2026
Progress and Challenges in AlGaN/GaN HEMT-Based Bio sensing
Perspective · 29 Dec 2025
Nanostructured Thin Films: Advancing Next-Generation Electronics
Brief report · 29 Dec 2025
Microstructural Defects: Impact on Material Properties and Performance
Conferences in this field
Upcoming conferences in this field.
Follow
New articles from what you follow go into your email digest, once you agree to alert emails.
- JournalJournal of Material Sciences & Engineering
- SubjectEngineering
- SubjectMaterials Science
- BylineArticles whose byline prints “M A Swillam”

