Scholars Central

Conference abstractPublished 26 Jun 2017

Optimization of the parameters of spherical agglomeration method

Authors: Orsolya Gyulai, Zoltan Aigner

University of Szeged, Hungary

Ask about this article

Abstract

Select any words in the title or abstract, or press this and choose a sentence.

In the industry area, direct compression is one of the most important techniques for the formulation of solid form drugs. For this, the active agent, so as our target product should possess appropriate parameters for example increased flow rate generated by large-size (>100 m) spherical or nearly spherical (roundness < 1.5) crystals or crystal agglomerates. For improving the morphology, spherical crystallization techniques can be used, like typical and non-typical ones. In case of non-typical methods (like antisolvent crystallization, cooling crystallization or combined method) mainly the physico-chemical parameters are changed. Typical methods (like quasi emulsion solvent diffusion method) use three solvents. From our previous work it became clear that spherical agglomeration is suitable for improving the morphology of ambroxol hydrochloride (AMB-HCl). This work aims at the optimization of the parameters of this method. For this, a factorial design was applied and then the results were evaluated with STATISTICA for Windows program. The critical parameters were as follows: agitation type and time, temperature differences between the solvent (dimethyl sulfoxide) and the antisolvent (ethyl acetate), composition of the solvent system (solvent/antisolvent ratio). The average size, aspect ratio and roundness of the products were analysed by LEICA Q500 MC Image Processing and Analysis System, then the ones with proper morphology were chosen for further experiments. With an additional factorial design, effects of other parameters were examined such as saturation rate and feed rate of AMB-HCL solution. The products were also examined by an individuallydeveloped hardness test. Four products were proved to possess suitable morphology compared to the target product. The application of horizontal shaker with shorter mixing times and lower temperature differences had a positive impact on the morphology of AMBHCl. The hardness of the products was large enough to keep the spherical particles stable.

Ask about this article

Answers come only from this article's title, abstract and keywords, each sentence pointing to where it comes from. Your question is sent to OpenAI to write the answer. Scholars Central does not store it.

Try:

Similar by topic

More from this journal

The newest in Pharmaceutical Regulatory Affairs: Open Access.

All its articles

Conferences in this field

Upcoming conferences in this field.

Follow

New articles from what you follow go into your email digest, once you agree to alert emails.

  • JournalPharmaceutical Regulatory Affairs: Open Access
  • SubjectPharmaceutical Sciences
  • BylineArticles whose byline prints “Orsolya Gyulai”
  • BylineArticles whose byline prints “Zoltan Aigner”

For authors and organisers

Publish, present and keep up with your field

Find the right journal for your paper and submit your manuscript.

Photo: Pexels