Conference abstract · 20 Feb 2017
Conference abstractPublished 20 Feb 2017
Soft thermal nanoimprint lithography
Ben-Gurion University of the Negev, Israel
Abstract
Select any words in the title or abstract, or press this and choose a sentence.
Nanoimprint lithography (NIL) can be performed using two types of resists. In the UV nanoimprint, a liquid UV curable resist film is embossed at the room temperature, and hardened by UV-crosslinking. Such resists can be imprinted either by rigid or soft (elastomeric molds). In thermal nanoimprint, a film of thermoplastic resist is embossed when heated above its glass transition temperature. This type of nanoimprint is not compatible with soft molds, whose relief features would deform while pressed against the highly viscous molten polymer. This limitation precludes many application of thermal NIL, such as ultra-high resolution nanopatterning of curved surfaces. In this work, we introduce a novel concept of hybrid Soft-Substrate-Rigid-Feature (SSRF) nano imprint mold, which is based on soft substrate with rigid relief features. The SSRF mold was fabricated by electron-beam lithography of Hydrogen Silsesquioxane (HSQ) on a sacrificial substrate, followed by transferring the obtained HSQ features to elastomeric PDMS substrate. Anti-adhesive coating, which is usually used for hard Si based molds, was successfully applied on SSRF mold, and was shown to be essential for robust demolding after the imprint. SSRF molds were used to imprint thin films of Polymethyl Benzacrylate âÂ?Â? a thermal resist with the glass transition temperature around 60 oC. This is, for the best of our knowledge, the first time that a thermal NIL was done with soft elastomeric molds. Furthermore, to demonstrate the uniqueness of our approach, we thermally imprinted PBMA films applied on lenses. In summary, we demonstrate here a novel concept of facile and robust mold for thermal nanoimprint lithography, which will pave a way to the broad variety of applications impossible up today.
Subjects
EngineeringMaterials ScienceAsk about this article
Answers come only from this article's title, abstract and keywords, each sentence pointing to where it comes from. Your question is sent to OpenAI to write the answer. Scholars Central does not store it.
Similar by topic
Conference abstract · 29 Feb 2016
Solvent-free fluidic organic distributed feedback lasers via soft-lithography
Mini review · 30 Jul 2022
A Note on Fabrication of Nano Mold for Nanoimprint Lithography
Conference abstract · 22 Sep 2016
SCIL nanoimprint solutions; high volume soft NIL for wafer scale sub-10nm resolution
Conference abstract · 2019
A low-cost manufacturing method for microfluidic device based on soft-lithography technique
More from this journal
The newest in Journal of Material Sciences & Engineering.
Article · 19 Feb 2026
Progress and Challenges in AlGaN/GaN HEMT-Based Bio sensing
Perspective · 29 Dec 2025
Nanostructured Thin Films: Advancing Next-Generation Electronics
Brief report · 29 Dec 2025
Microstructural Defects: Impact on Material Properties and Performance
Conferences in this field
Upcoming conferences in this field.
Follow
New articles from what you follow go into your email digest, once you agree to alert emails.
- JournalJournal of Material Sciences & Engineering
- SubjectEngineering
- SubjectMaterials Science
- BylineArticles whose byline prints “Mark Schvartzman”

