Research article · 2013
Conference abstractPublished 20 Feb 2017
Graphite based minimum quantity dry lubrication at drilling CFRP
University of Stuttgart, Germany Fraunhofer Institute for Manufacturing Engineering and Automation IPA, Germany
Abstract
Select any words in the title or abstract, or press this and choose a sentence.
The machining of carbon fiber reinforced plastic (CFRP) causes high tool wear and thus induced costs. One approach is to use liquid cooling lubricants e.g., Minimum Quantity Lubrication (MQL), as known from metal cutting. Due to the unlimited types of CFRP and cooling lubricants, chemical interactions between them cannot be excluded. The humidity of cooling lubricants can also affect the mechanical properties of the CRFP, like a softening of the matrix. An additional consequence can be a reduced fiber-matrixadhesion which results in lower fracture toughness. Therefore, this article presents a new MQL technology, which is completely dry. For this purpose, a prototypical fluidization device was constructed. It boosts minimal amounts of graphite powder by using compressed air to the cutting zone between the tool and work piece. Graphite was selected as dry lubricant because of three reasons: First, graphite can be used as a dry lubricant; second, the contamination by graphite powder is not relevant as the dust and chips from the cutting process are extracted by exhaustion anywhere and; third, chemical interactions between the carbon fibers and graphite are not to be expected. By spraying tests with internally cooled drills, it was shown that the current fluidization device is already able to deliver graphite mass flows less than 3 g/h reliably. First drilling tests with internal MQDL-supply have shown a significant reduction in tool wear, compared with cooling by pure compressed air. Finally, a H2O-enrichment device was constructed to extend the fluidization prototype. The aim is to include foreign molecules in the lattice structure of the graphite by using H2O-molecules. As described in literature, the sliding characteristics of graphite are improved by these additional molecules. The H2O-enrichment device is able to achieve almost a 90% relative humidity of the compressed air that is used to transport the graphite.
Subjects
EngineeringMaterials ScienceAsk about this article
Answers come only from this article's title, abstract and keywords, each sentence pointing to where it comes from. Your question is sent to OpenAI to write the answer. Scholars Central does not store it.
Similar by topic
Research article · 2010
Nanofluids as cutting fluids in minimum quantity lubrication turning operation
Research article · 2018
Electrospun Polyacrylonitrile Based Carbon Nanofibers: The Role of Creep Stress towards Cyclization and Graphitization
Conference abstract · 12 Sep 2016
Alumina-based nanocomposites using graphite nanoplatelets as reinforcement
Research article · 2017
Recommendations for Compatibility of Different Types of Polymers with Potassium/Sodium Formate-Based Fluids for Drilling Operations: An Experimental Comparative Analysis
More from this journal
The newest in Journal of Material Sciences & Engineering.
Article · 19 Feb 2026
Progress and Challenges in AlGaN/GaN HEMT-Based Bio sensing
Perspective · 29 Dec 2025
Nanostructured Thin Films: Advancing Next-Generation Electronics
Brief report · 29 Dec 2025
Microstructural Defects: Impact on Material Properties and Performance
Conferences in this field
Upcoming conferences in this field.
Follow
New articles from what you follow go into your email digest, once you agree to alert emails.
- JournalJournal of Material Sciences & Engineering
- SubjectEngineering
- SubjectMaterials Science
- BylineArticles whose byline prints “Robert Beckenlechner”
- BylineArticles whose byline prints “Marco Schneider”
- BylineArticles whose byline prints “Karlheinz Pulli”

