Article · 19 Feb 2026
Conference abstractPublished 25 Mar 2019
Bonded NdFeB magnets produced by selective laser sintering
Griffith University, Australia The Prince Charles Hospital, Australia Queensland University of Technology, Australia Monash University, Australia
Abstract
Select any words in the title or abstract, or press this and choose a sentence.
The production of complex-shaped bonded NdFeB (neodymium-iron-boron) magnets is a key element in the development of compact and efficient electromechanical devices. Due to constraints imposed by current manufacturing methods, geometrically complex magnets are high in cost and require long lead times. The use of additive manufacturing techniques for low volume production of complex geometries from a wide range of materials has been shown to dramatically decrease product cost and lead times. This work describes the production and characterisation of net-shaped bonded NdFeB magnets using selective laser sintering (SLS) from mechanically mixed powders. Net-shaped magnets, cuboids for geometrical measurements and cylinders for magnetic measurements, were produced using magnetic powders with both flake and spherical particle morphologies mixed with polyamide-12. The powder loading fractions, which were based upon the ratio of the bulk density to the theoretical density of the individual magnetic powders, were 38% and 56%/volume for the flake and spherical powders respectively. The mixed feedstock was processed using an experimental SLS machine equipped with a mechanically tracked 15 W solid state laser emitting radiation at a wavelength of 445 nm. The magnets were shown experimentally to possess a high level of geometrical accuracy (less than 0.15 mm deviation from model data) with magnetic properties comparable to permanent magnets produced using other additive manufacturing methods (residual induction of 284 and 357 mT, intrinsic coercivity of 661 and 735 kA/m for flake and spherical powders respectively). This work has demonstrated the feasibility of producing bonded magnets using SLS, allowing the possibility for the rapid, cost-effective production of geometrically complex magnets. Recent Publication: 1. T Masuzawa, M Osa and M Mapley (2017) â??Motor and Suspension Design,â?� Mechanical Circulatory and Respiratory Support, 1st Ed, Oxford, UK, Elsevier, ISBN: 9780128104927.
Subjects
EngineeringMaterials ScienceAsk about this article
Answers come only from this article's title, abstract and keywords, each sentence pointing to where it comes from. Your question is sent to OpenAI to write the answer. Scholars Central does not store it.
More from this journal
The newest in Journal of Material Sciences & Engineering.
Perspective · 29 Dec 2025
Nanostructured Thin Films: Advancing Next-Generation Electronics
Brief report · 29 Dec 2025
Microstructural Defects: Impact on Material Properties and Performance
Conferences in this field
Upcoming conferences in this field.
Follow
New articles from what you follow go into your email digest, once you agree to alert emails.
- JournalJournal of Material Sciences & Engineering
- SubjectEngineering
- SubjectMaterials Science
- BylineArticles whose byline prints “Martin Mapley”
- BylineArticles whose byline prints “Nicole Bartnikowski”
- BylineArticles whose byline prints “Geoffrey Tansley”
- BylineArticles whose byline prints “Andrew Busch”
- BylineArticles whose byline prints “Shaun D Gregory”

