Perspective · 28 Jun 2023
Conference abstractPublished 25 Mar 2019
Advanced knee implants for the third millennium
Brno University of Technology, Czech Republic
Abstract
Select any words in the title or abstract, or press this and choose a sentence.
This work deals with today’s frequent problem of human joint replacements by applying of advanced radiology techniques (CT, MR, X-ray), application of powder materials and the modern additive (melting of metal powders by electron beam - EBM) and machining technologies. The main attention is devoted to the EBM used by the ARCAM Q10plus machine. A special attention is then paid to the data processing, optimization of design, technological parameters, quality of the produced materials and their post-processing, expressed by 3D topographies of the machined surfaces, machinability, mechanical and tribological properties. The studied technologies include turning, milling, belt grinding and tumbling, in dry conditions. In general, the material exhibits a high resistance to the machining, expressed in terms of specific cutting energies (KISTLER 9575B, Dynoware). Analyses of the samples were made to quantify the production precision and quality (electron microscopy Tescan MIRA 3GM, electron dual microscopy TermoFischer, Alicona IF G6, Mahrvision MM 420) after sintering in different technological modes. The final surface quality results in glossy surfaces (Ra<0.04 um) with high material ratios that enhance the resistance to fatigue crack propagations. The results are very encouraging because this advanced technology (starting at the basic surgical inspections up to the operation with advanced taylor-made implant) can offer an optimized implant that prevails in superior mechanical properties, light mass and excellent mechanical properties. Moreover, a bigger ratio of the original bone can be preserved so a longer life of the implants and reduction of re-operations and after-effects can be expected. Recent Publications 1. Rysava Z, Brushi S, Piska M and zidek J (2018) Comparing the performance of micro-end mills when micromilling of additive manufactured ti-6al-4v titanium alloy. MM Science Journal 4:2543-2546. 2. Piska M, Trubacova P and Horníková J (2017) Analysis of powder steel material, laser sintering technology and machining on surface parameters and fatigue. Materialwissenschaft und Werkstofftechnik 48(7):1-11
Subjects
EngineeringMaterials ScienceAsk about this article
Answers come only from this article's title, abstract and keywords, each sentence pointing to where it comes from. Your question is sent to OpenAI to write the answer. Scholars Central does not store it.
Similar by topic
Case report · 29 Nov 2022
Optimization of Knee Implant with Different Biomaterials Using Finite Element Analysis
Article · 2017
HemiCAP-Wave and#174; Implant in Salvage Procedure of a Large Trochlea Lesion in the Knee in a 37 Year Old Former Active Man
Case report · 2017
HemiCAP-Wave ® Implant in Salvage Procedure of a Large Trochlea Lesion in the Knee in a 37 Year Old Former Active Man
Research article · 2014
(Ultra) Structural Details of Cells and Matrix during Early Cartilage Regeneration after Chondrocyte Implantation in the Equine Knee Joint
More from this journal
The newest in Journal of Material Sciences & Engineering.
Article · 19 Feb 2026
Progress and Challenges in AlGaN/GaN HEMT-Based Bio sensing
Perspective · 29 Dec 2025
Nanostructured Thin Films: Advancing Next-Generation Electronics
Brief report · 29 Dec 2025
Microstructural Defects: Impact on Material Properties and Performance
Conferences in this field
Upcoming conferences in this field.
Follow
New articles from what you follow go into your email digest, once you agree to alert emails.
- JournalJournal of Material Sciences & Engineering
- SubjectEngineering
- SubjectMaterials Science
- BylineArticles whose byline prints “Miroslav Piska”

