Conference abstractPublished 16 Apr 2018
Dual ion beam sputtered high retention resistive switch with memristive behaviour
Indian Institute of Technology, India
Abstract
Select any words in the title or abstract, or press this and choose a sentence.
The memory effects in a memristor can be realized through the switching behavior between two distinct resistance states, low resistance state (LRS) and high resistance state (HRS) driven by low pulse voltages. ZnO-based thin films such as undoped ZnO, Mg-doped ZnO, Na-doped ZnO and Mn-doped ZnO have attracted considerable interest as promising resistive switching materials. To start with fabrication of device, 60nm thick ZnO thin film is deposited over Al/SiO2/Si substrate at a substrate temperature of 100Ã?°C, with DIBS background pressure of 1Ã?Â?10-8 mBar and Ar:O2 (2:3) (flow rate in sccm), respectively. Finally, circular Al electrodes of 500Ã?µm is deposited on the surface of ZnO thin film. Further, I-V characteristics are measured by sweeping a DC voltage in sequence of 0-(+8 V)- 0-(-8 V)-0 in steps of 0.5V for a compliance current of 1mA. Set and reset voltages of device are evaluated to be at -6/6V. Device shows excellent endurance measured at 0.1V for 250 cycles. Retention performance assessed at 0.1V read voltage exhibits outstanding non-volatile behavior for 106s extrapolated to 10 years. Presence of oxygen vacancies (VO), interstitial oxygen ions (IO) and lattice oxygen ions are confirmed by X-ray photoelectron spectroscopy (XPS) Photoluminescence (PL) of ZnO thin film. HR-TEM image of Al/ZnO interface shows an amorphous AlOx interfacial layer (~4-5nm) formed at interface for the device in high resistance state (HRS) state. Formation of this interfacial layer at RESET voltage transits the device from LRS to HRS and dissolution at SET voltage leads to change device state to LRS. Our memory device as fabricated by DIBS exhibits excellent performance parameters, retention and endurance to implement it for a practical RRAM. Our work could play a very significant role in realizing similar memristive devices with high performance parameters in future.
Subjects
Computer Science & ITAsk about this article
Answers come only from this article's title, abstract and keywords, each sentence pointing to where it comes from. Your question is sent to OpenAI to write the answer. Scholars Central does not store it.
Follow
New articles from what you follow go into your email digest, once you agree to alert emails.
- JournalAdvances in Robotics & Automation
- SubjectComputer Science & IT
- BylineArticles whose byline prints “Amitesh Kumar”
- BylineArticles whose byline prints “Mangal Das”
- BylineArticles whose byline prints “Brajendra S Sengar”
- BylineArticles whose byline prints “Abhinav Kranti”
- BylineArticles whose byline prints “Shaibal Mukherjee”

