Scholars Central

Conference abstractPublished 19 Feb 2018

Development of SiC based nanocomposites with enhanced electrical conductivity

Authors: Pavol Hvizdos

Institute of Materials Research-Slovak Academy of Sciences, Slovakia

Ask about this article

Abstract

Select any words in the title or abstract, or press this and choose a sentence.

Three principal types of materials were developed and investigated: SiC-TiNbC, SiC-CNT a SiC-graphene. They were compacted using standard hot pressing (HP), spark plasma sintering (SPS), and rapid hot pressing (RHP). Their microstructure, chemical and phase composition were studied in detail, the results showed successful microstructure design and confirmed desired composition. In all cases a reference material, a single phase SiC, prepared by the same ways, was used for comparison. As the base, series of three optimized SiC-TiNbC (with 30, 40 and 50 wt.% of TiNbC) composites were developed. Increase in electrical conductivity by four orders was achieved without compromising the mechanical and tribological properties. Technological tests showed possibilities to machine these materials by electric discharge technique as well as other non-conventional methods. The materials with carbon based nano-fillers included SiC-graphene and SiCCNT (carbon nanotubes). Methods of their preparation were optimized, mainly to achieve a good distribution of the carbon nano-phases. In SiC-graphene (graphene nano-platelets and reduced graphene oxide up to 5 wt.%) the rapid hot press (RHP) technique was successfully developed and tested and materials with graphene nano-platelets and reduced graphene oxide were produced. Both types reached satisfactory parameters with respect to their microstructure and basic mechanical properties. Their electrical conductivity increased by four orders which clearly shows their potential. In SiC-CNT (with up to 10 wt.% CNT) a new technique of in situ CNT preparation by CCVD was developed. This enabled to solve the problem with distributing of CNTs and in this way to increase the electrical conductivity by about three orders of magnitude.

Ask about this article

Answers come only from this article's title, abstract and keywords, each sentence pointing to where it comes from. Your question is sent to OpenAI to write the answer. Scholars Central does not store it.

Try:

More from this journal

The newest in Journal of Material Sciences & Engineering.

All its articles

Conferences in this field

Upcoming conferences in this field.

Follow

New articles from what you follow go into your email digest, once you agree to alert emails.

  • JournalJournal of Material Sciences & Engineering
  • SubjectEngineering
  • SubjectMaterials Science
  • BylineArticles whose byline prints “Pavol Hvizdos”

For authors and organisers

Publish, present and keep up with your field

Find the right journal for your paper and submit your manuscript.

Photo: Pexels