Conference abstract
Conference abstract
Bit selection and optimization while drilling development wells in a challenging oil field
Abstract
Select any words in the title or abstract, or press this and choose a sentence.
Operators drilling budget is mainly drawn by drilling fluid & bit as consumable material. Minimizing these two factors will reduce well cost sharply. As an engaging element, bit plays a big role in ROP (rate of penetration) and drilling performance. Many of bit record remain confidential and has internal use for the operators and also during developing a field access to offset well data may not be easy. To provide a benchmark for future drilling project in South-Azadegan (SA) field, Iran and to give an idea for drilling engineers for future development wells in this field, the bit design & maturation process for bit selection is presented in this paper. History of running the bit for each hole section for similar well profile is discussed, feedback of each bit run is analyzed and data is provided for bit manufacture regarding to formation lithology, abrasiveness, sticky-soft or very hard formation. Then newer designed bit was ran and continuous optimization practiced to achieve a universal bit for each hole section. At 26??? top hole section tricone milled tooth bit was utilized, while combination of tricone and PDC bits was used for 17½??? section. Challenging high pressure formation in 12¼ section was drilled with a different type of PDC bit and best record is documented. 8 ½ ???section which is composed of a vertical & directional also tried with different bit type & a good bit design was achieved. Drain section of the reservoir in horizontal 6 1/8??? section was drilled while facing hydraulic and hole cleaning limitation. Latest optimized 6 1/8??? bit for this section is achieved. To date of publishing this paper, presented are the best selected bits for each hole size, which optimized while drilling 20 wells in a scattered pattern on SA field through 2.5 years of operations.
Keywords
Ask about this article
Answers come only from this article's title, abstract and keywords, each sentence pointing to where it comes from. Your question is sent to OpenAI to write the answer. Scholars Central does not store it.
Similar by topic
Conference abstract
Selection and design for some drilling equipment for well
Conference abstract · 20 Jul 2018
Experimental and Theoretical Evaluation of Solid Particle Erosion in An Internal Flow Passage within A Drilling Bit
Article · 19 Apr 2024
Oil and Gas Well Production Forecasting Based on Machine Learning Models: The Volve Field Case
Conference abstract
Horizontal well geological optimization in tight sand gas field of braided-river facies
More from this journal
The newest in Journal of Petroleum & Environmental Biotechnology.
Article · 30 Mar 2026
Subsurface Microbial Pathways in Oxygen-Limited Hydrocarbon Breakdown Systems
Article · 30 Mar 2026
Microbial Pathways and Industrial Approaches in Bio surfactant Production Systems
Article · 30 Mar 2026
Microbial Breakdown Processes in Petroleum Hydrocarbon Degradation
Conferences in this field
Upcoming conferences in this field.
Follow
New articles from what you follow go into your email digest, once you agree to alert emails.
- JournalJournal of Petroleum & Environmental Biotechnology
- SubjectEnvironmental & Earth Sciences
- SubjectBiochemistry & Biotechnology
- SubjectPetroleum & Mining
- BylineArticles whose byline prints “Vahid Farahani”
- BylineArticles whose byline prints “Mardani Rad”
- BylineArticles whose byline prints “Mansoor Zoveidavianpoor”

