Scholars Central

Conference abstract

Recycling valuable products from mercury capture processes

Authors: M Rosa Martinez Tarazona, M Antonia oopez Anton, Cristina Antunona, Elena Rodríguez, Roberto Garcia

Ask about this article

Abstract

Select any words in the title or abstract, or press this and choose a sentence.

One of the options for reducing the industrial emissions of mercury in gas phase is to retain this element and its compounds on solid adsorbents. The adsorbents evaluated to date, can be used by injection in a gas stream, or in fixed or fluidized beds. In both cases, there are different solids that can be considered. The most commonly used are activated carbons and carbon materials, usually doped with reagents that enhance the capture of mercury species on their surface. The use of solid adsorbents for the capture of mercury in the gas phase entail some difficulties and limitations, of which cost and environmental assessment of the produced wastes are important drawbacks. It is very important to bear in mind that in any adsorption process for the elimination of a pollutant, the production of a contaminated waste needs to be avoided. For this reason, the development of a process in which a regenerable adsorbent is used and, at the same time, most of the products involved are recovered, is a promising recycling process. The process which is the subject of this work, schematized in figure 1, consists in using of a carbon material doped with a noble metal as adsorbent. This material employed in a bed, can be regenerated over a number of cycles and, when exhausted, it can be subjected to simple processes allowing the recovery of most of the valuable products involved in the process. To attain this goal, on one hand the mercury present in the contaminated gas is concentrated and condensed as liquid mercury. On the other, the carbon material supporting the noble metal can be burned away to recover the impregnated gold. In this way, the depleted material and waste products can be converted into valuable remanufactured products, turning waste into a resource PDF HTML

Ask about this article

Answers come only from this article's title, abstract and keywords, each sentence pointing to where it comes from. Your question is sent to OpenAI to write the answer. Scholars Central does not store it.

Try:

Similar by topic

More from this journal

The newest in International Journal of Waste Resources.

All its articles

Conferences in this field

Upcoming conferences in this field.

Follow

New articles from what you follow go into your email digest, once you agree to alert emails.

  • JournalInternational Journal of Waste Resources
  • SubjectEnvironmental & Earth Sciences
  • BylineArticles whose byline prints “M Rosa Martinez Tarazona”
  • BylineArticles whose byline prints “M Antonia oopez Anton”
  • BylineArticles whose byline prints “Cristina Antunona”
  • BylineArticles whose byline prints “Elena Rodríguez”
  • BylineArticles whose byline prints “Roberto Garcia”

For authors and organisers

Publish, present and keep up with your field

Find the right journal for your paper and submit your manuscript.

Photo: Pexels