Conference abstract · 17 Sep 2020
Conference abstractPublished 7 Sep 2017
Thermoplastic starch-based films
Kasetsart University, Thailand
Abstract
Select any words in the title or abstract, or press this and choose a sentence.
Recently, the materials produced from renewable resources, particularly plants, have been received much attention due to their sustainability, biodegradability, non-toxicity, being environmentally friendly, etc. Starch is one of the naturally abundant polysaccharides found in various types of agricultural crops such as potato, corn, rice, pea, including cassava. The properties of starch depend on their sources and compositions, especially a weight fraction of linear amylose and branched amylopectin polymers. In general, amylopectin provides semi- crystalline structure to starch granules. Crystallinity of starch can be destroyed by the processes called gelatinization, in the presence of access amount of water, and plasticization. For the latter, starch is converted into thermoplastic material, i.e. thermoplastic starch (TPS), by incorporating plasticizer under applying heat and shear. Although TPS possesses good gas barrier property and mainly produced from starch, which is cheap, non-toxic, naturally abundant, renewable, biodegradable and compostable, its high water/moisture absorption, which causes poor mechanical and barrier properties, limits its utilization. Blending TPS with other more hydrophobic polymers, such as poly(lactic acid) (PLA), polyethylene (PE), chitosan, etc. is an alternative to improve the properties of TPS and to widen its utilization. Some examples for improving the performances of TPS are discussed in the presentation. Incorporating chitosan into TPS film through blown film extrusion is an interesting technique to produce edible film due to less energy and time consumption as compared with the solution casting method. Chitosan could improve both tensile and barrier properties of TPS film. Blending TPS with PLA is also one of our goals to obtain the completely biobased and biodegradable material for packaging applications including plastic bags, film and wrap, with competitive cost as compared with neat PLA. The obtained PLA/TPS blends possessed better blown film processability and greater extensibility than PLA film. To reduce the use of petroleum-based plastics, TPS is possibly blended with PE; however, the phase separation between these two polymers has to be overcome. Starch stearate (ST-SA) was used as a compatibilizer for the PE/TPS blend. Tensile properties of the PE/TPS blend were improved by incorporating ST-SA (Figure 1) with the reduced TPS phase size and the better TPS phase distribution throughout the film matrix.
Subjects
EngineeringChemistryAsk about this article
Answers come only from this article's title, abstract and keywords, each sentence pointing to where it comes from. Your question is sent to OpenAI to write the answer. Scholars Central does not store it.
Similar by topic
Conference abstract · 31 Jul 2020
Potato Starch Polymeric Films: Environment-Eco-Friendly Waste Alternative to Petroleum-Based Polymers
Research article · 30 Nov 2011
Fabrication of starch-based microparticles by an emulsification crosslinking method
Conference abstract · 7 Sep 2017
Developing thermoplastic films from wheat flours with different proportions of finely grinded bran
Research article · 2 Jun 2014
Preparation and properties of starch-based film using N-(1-hydroxy-2-methylpropan-2-yl)formamide as a new plasticizer
More from this journal
The newest in Journal of Chemical Engineering & Process Technology.
Research article · 10 Sep 2025
Study of the Effect of Salt on the L-L Extraction of Carboxylic Acids (Formic; Acetic; Propionic) by Tributylphosphate (TBP)
Conference abstract · 18 Aug 2025
Sustainable biopolymers from agricultural waste for packaging applications
Conference abstract · 18 Aug 2025
Features and in vitro assessment of anti-coronavirus activity of organic paints on human lung fibroblasts
Conferences in this field
Upcoming conferences in this field.
Follow
New articles from what you follow go into your email digest, once you agree to alert emails.
- JournalJournal of Chemical Engineering & Process Technology
- SubjectEngineering
- SubjectChemistry
- BylineArticles whose byline prints “Rangrong Yoksan”
- BylineArticles whose byline prints “Nattaporn Khanoonkon”
- BylineArticles whose byline prints “Khanh Minh Dang”

