Conference abstract · 7 Sep 2017
Conference abstractPublished 7 Sep 2017
Processing optimization and characterization for PLA/mgalcu-LDH/PVP composite microsphere
College of Chemistry and Chemical Engineering, Shanghai University of Engineering Science, China; College of Mechanical Engineering, Shanghai University of Engineering Science, China
Abstract
Select any words in the title or abstract, or press this and choose a sentence.
In order to improve the mechanical properties of polylactic acid(PLA), PLA/MgAlCu-LDH/polyvinyl pyrrolidone(PVP) composite microsphere was successfully prepared on the basis of seminal emulson polymerization with PLA and PVP as monomer, MgAlCu-LDH as intercalating agent. Design-Expert 8.5 software was employed to optimize the processing technology with two steps. Firstly, single factor was analyzed based on the mass fraction ratio of MgAlCu-LDH to PLA, PVP concentration and stirring speed range being 1/15~1/8, 1~2%, 800~1200r/min, respectively. Secondly, the interaction effects of three factors were discussed according to the analysis of the software. The results show that the influence factors to microspheres size were as follows: the stirring speed > the mass fraction ratio of MgAlCu-LDH to PLA > PVP concentration. The optimized processing technology of microspheres indicates that the mass fraction ratio of MgAlCu-LDH to PLA is 1/15, the concentration of PVP is 2%, the stirring rate is 1200r/min. The structure and morphology of the dried frozen composite microsphere were characterized by XRD, FT-IR and SEM. The intercalation of part of the PLA into the gap of MgAlCu-LDH would be responsible for the new peaks on XRD spectra of MgAlCu-LDH and the disappear peaks at 1750cm-1, 1200cm-1 assigned to C=O on FT-IR spectra of PLA, which proves PLA/ MgAlCu-LDH/PVP composite microsphere was successfully prepared. Interestingly, some tinny channels resulted from volatile solvent on the surface of microsphere may be benefit for biocompatible.
Subjects
EngineeringChemistryAsk about this article
Answers come only from this article's title, abstract and keywords, each sentence pointing to where it comes from. Your question is sent to OpenAI to write the answer. Scholars Central does not store it.
Similar by topic
Conference abstract · 7 Sep 2017
Properties of bio-composites based on polylactic acid (PLA)/polycaprolactone (PCL)/cinnamon oil
Conference abstract · 7 Sep 2017
Biodegradable and tough pla-cellulose based composites via stereo-complexation
Research article · 2018
Characterization of 3D Printed PLA/PCL/TiO2 Composites for Cancellous Bone
Research article · 2011
Preparation of hollow cobaltic carbon composite microspheres via one-pot template self-ablated process
More from this journal
The newest in Journal of Chemical Engineering & Process Technology.
Research article · 10 Sep 2025
Study of the Effect of Salt on the L-L Extraction of Carboxylic Acids (Formic; Acetic; Propionic) by Tributylphosphate (TBP)
Conference abstract · 18 Aug 2025
Sustainable biopolymers from agricultural waste for packaging applications
Conference abstract · 18 Aug 2025
Features and in vitro assessment of anti-coronavirus activity of organic paints on human lung fibroblasts
Conferences in this field
Upcoming conferences in this field.
Follow
New articles from what you follow go into your email digest, once you agree to alert emails.
- JournalJournal of Chemical Engineering & Process Technology
- SubjectEngineering
- SubjectChemistry
- BylineArticles whose byline prints “Shuhua Zhang”
- BylineArticles whose byline prints “Hongmei Zhang”
- BylineArticles whose byline prints “Yang Chen”
- BylineArticles whose byline prints “Juan Wang”
- BylineArticles whose byline prints “Xiuxiu Han”
- BylineArticles whose byline prints “Weijun Liu”

