Conference abstract · 2019
Conference abstractPublished 12 Sep 2016
Development of fluid flow control system
Kongju National University, Korea
Abstract
Select any words in the title or abstract, or press this and choose a sentence.
Automatic control systems have been evolving over the past 150 years. These systems began as simple mechanical feedback devices and have evolved into complex electronic and computer controlled systems. The purpose of this study consists of completing an apparatus that demonstrates the automatic flow control of water. Developed flow control system is composed of software and hardware. The flow rate is measured by orifice meter when water supplied from pump flows through pipes. Measured flow rate by orifice meter is converted into digital signals by pressure transmitter, then, sent to personal computer by data acquisition system. Afterwards, manipulated electric signal was calculated by LabVIEW control algorithm is sent to the control valve and converted to pneumatic signal to operate the control valve. Computer program for the data acquisition and control was prepared with LabVIEW of National Instruments. The electric signal and flow rates received from data acquisition board are monitored through two graphic windows. LabVIEW algorithm calculates errors comparing flow rate signals and set point, then, generates the manipulated variable values, which are needed to operate the control valve. For the determination of PID design parameters ultimate gain and ultimate period were investigated by increasing the proportional gain only form low value to high value, then, three control parameters were calculated by Ziegler-Nichols tuning method. When control performances were investigated for not only set point changes but also disturbance changes, the developed system showed good performances for both cases. Developed control system will be used as a tool for the education control theory, and also will be applied to industry.
Subjects
EngineeringChemistryAsk about this article
Answers come only from this article's title, abstract and keywords, each sentence pointing to where it comes from. Your question is sent to OpenAI to write the answer. Scholars Central does not store it.
Similar by topic
Conference abstract · 7 Nov 2018
On the mechanistic modeling of fluid flow and heat transfer in supercritical-pressure systems
Short communication · 25 Jun 2021
New Intelligent Neural Network Program Developed Based on Revolutionary Predictive Control for a System Tracking
Short communication · 28 Jul 2021
Simulation and Ratio Control of Fluid Catalytic Cracking Unit
Perspective · 25 Jun 2026
Magnetohydrodynamic Flow Control in High Temperature Plasma Reactor Systems
More from this journal
The newest in Journal of Chemical Engineering & Process Technology.
Research article · 10 Sep 2025
Study of the Effect of Salt on the L-L Extraction of Carboxylic Acids (Formic; Acetic; Propionic) by Tributylphosphate (TBP)
Conference abstract · 18 Aug 2025
Sustainable biopolymers from agricultural waste for packaging applications
Conference abstract · 18 Aug 2025
Features and in vitro assessment of anti-coronavirus activity of organic paints on human lung fibroblasts
Conferences in this field
Upcoming conferences in this field.
Follow
New articles from what you follow go into your email digest, once you agree to alert emails.
- JournalJournal of Chemical Engineering & Process Technology
- SubjectEngineering
- SubjectChemistry
- BylineArticles whose byline prints “Tae Won Kang”

