Article · 25 Feb 2026
Conference abstractPublished 16 Oct 2017
Structural design of powerhouses for hydropower projects
SMEC(I) Pvt. Ltd., India
Abstract
Select any words in the title or abstract, or press this and choose a sentence.
Powerhouse for a hydropower project is defined as a building which houses the turbine, crane, the rotor assembly area, cable trays and other ancillary mechanical and electrical systems. Different structural systems for the superstructure are proposed in powerhouses already constructed or under construction in various parts of the world combining both RCC and structural steel elements. These systems are as enumerated as: (1) RCC superstructure with RCC girder for EOT cranes and trussed steel roof, (2) RCC superstructure with RCC girder for EOT cranes and portal steel roof, (3) RCC superstructure with steel girder for EOT cranes and trussed steel roof, and (4) Steel superstructure with steel girder for EOT cranes and portal steel roof. The substructure of the powerhouse consists of the scroll case and draft tube which varies with the type of turbine proposed viz. Pelton, Francis (both vertical and horizontal), Kaplan etc. The scroll case also can be only concrete or steel lining embedded in concrete. The design of the superstructure is basically a 3-dimensional frame design done using various state of art software like STAAD.Pro. Here the design is checked for serviceability conditions like deflection and crack width as well as for structural adequacy. The columns, beams and the girders that form part of the 3D frame are provided with adequate size to meet the serviceability criteria and adequate reinforcement to take care of different compressive, bending and tensile stresses. The design of the substructure on the other hand basically revolves around two components; the scroll case and draft tube. The scroll case is essentially tube carrying water with changing dimensions as it empties into the draft tube. As such it can be designed by taking cross-sections at regular intervals. For steel scroll cases, the design of the steel part lies with the electromechanical vendor. However the concrete embedment around the steel casing is done by civil team. The civil design majorly depends on the pressure to be taken by the steel part and the concrete embedment. An initial gap between the two parts is kept so that the head on the scroll case is shared. The draft tube on the other hand is like a box with increasing height as it goes and meets the tail race. Generally it is a RCC structure and is designed like a box with intermediate piers.
Ask about this article
Answers come only from this article's title, abstract and keywords, each sentence pointing to where it comes from. Your question is sent to OpenAI to write the answer. Scholars Central does not store it.
More from this journal
The newest in Journal of Civil and Environmental Engineering.
Conferences in this field
Upcoming conferences in this field.
Follow
New articles from what you follow go into your email digest, once you agree to alert emails.
- JournalJournal of Civil and Environmental Engineering
- SubjectEngineering
- SubjectEnvironmental & Earth Sciences
- BylineArticles whose byline prints “Honey Mehra”

