Article · 31 Oct 2024
Conference abstractPublished 2 Oct 2017
3-D printed propulsion systems for small spacecraft
Utah State University, USA
Abstract
Select any words in the title or abstract, or press this and choose a sentence.
The Propulsion Laboratory at Utah State University has recently developed a promising "green" alternative to hydrazine-based space propulsion systems. Additive manufacturing is an essential feature of this technology. Multiple vendors using well-developed commercial technologies can produce identical pieces simultaneously, resulting in a "virtual assembly line." This approach is ideal for supporting the small-to-intermediate volume production rates required for most Aerospace applications, and offers potential of improving component quality, consistency, and performance, while reducing development and production costs. Because additive manufacturing builds specimens one layer at a time, 3D-printed ABS possesses unique electrical breakdown properties that have been exploited to allow for rapid on-demand system ignition. The electrical breakdown property of 3-D printed acrylonitrile butadiene styrene (ABS) was discovered serendipitously while investigating the thermodynamic performance of ABS as a hybrid rocket fuel. On demand ignition has been demonstrated using nitrous oxide, gaseous oxygen, and hydrogen peroxide as oxidizers. This concept has been developed into a power-efficient system that can be started and restarted with a high degree of reliability. Multiple prototype devices based on this concept with thrust values ranging from 4.5 to 900 N have been developed and tested. All units are capable of multiple restarts and can be operated in either continuous or pulse modes. The GOX/ABS thruster has achieved specific impulse (Isp) values in excess of 220 seconds under ambient operating conditions, and greater than 280 seconds under soft-vacuum conditions. This Isp value exceeds the hydrazine performance level by more than 20%.
Subjects
EngineeringAsk about this article
Answers come only from this article's title, abstract and keywords, each sentence pointing to where it comes from. Your question is sent to OpenAI to write the answer. Scholars Central does not store it.
Similar by topic
Conference abstract · 5 Oct 2015
Advanced technology historical development and technology advancements in electric aircraft and spacecraft propulsion
Conference abstract · 18 Aug 2022
Attitude control of a small spacecraft using Reconfigurable Embedded Magnetorquers
Conference abstract · 18 Jun 2018
Control system of orientation for the elastic spacecraft
Conference abstract · 18 Jun 2018
Control system of orientation for the elastic spacecraft
More from this journal
The newest in Journal of Aeronautics & Aerospace Engineering.
Research article · 17 Jul 2026
Numerical Analysis of Influence of Inward Dimples on Aerodynamic Characteristics of Symmetrical Airfoil Using CFD
Review article · 28 May 2025
Modelling of Hypersonic Flows and their Applications
Research article · 19 Apr 2025
Design and Multidisciplinary Analysis of Commercial Aircraft
Conferences in this field
Upcoming conferences in this field.
Follow
New articles from what you follow go into your email digest, once you agree to alert emails.
- JournalJournal of Aeronautics & Aerospace Engineering
- SubjectEngineering
- BylineArticles whose byline prints “Stephen A Whitmore”

