Review article · 16 Mar 2016
Conference abstractPublished 11 May 2017
Solar 3-D printer for lunar construction
Lavochkin Association, Russia; Institute of Astronomy of the Russian Academy of Sciences (INASAN), Russia
Abstract
Select any words in the title or abstract, or press this and choose a sentence.
A concept of a 3-D printer on solar energy to build permanent constructions on the moon from lunar regolith and waste is proposed. The main part of printer is a spherical mirror that focuses the sunlight into the working spot. Very easily mirror can be made of a thin film mirror. At this point, the temperature reaches 5000 degrees. If solid particles of lunar regolith pour to this place, they will melt therein, and connected with the substrate. With a diameter of 4 meters focusing mirror regolith processing rate is 10 g/s. During the lunar day (14 earth days), the printer will process 12 tones of regolith. The controlled movement of the spot will create a gas-tight space of any configuration entirely from local materials. The proposed construction of a 3-D printer does not contain a print head, in which the molten regolith may freeze during lunar night and disable it. After sunrise the printer will continue its work. After sunrise, the printer will continue its work. If you now run the printer on the moon, at the time of landing astronauts on him, he will have a solid frame building, able to protect the crew from cosmic radiation. Constructed building will be necessary to ensure the transition hatches sealed and provide them with life-support systems. Russian Federal Space Program for 2016-2025 envisages the creation of the necessary groundwork for a full-scale lunar exploration after 2025 and the implementation by 2030 of landing a man on the moon. Laboratory and accommodations of a permanent station on the moon shall ensure full protection of the crew from harmful cosmic radiation, in the first place from hard solar radiation. In the absence of a protective atmosphere and magnetic field on the moon, the premises must be protected sufficiently by thick coating of absorbent material. The thickness of the walls of the space module developed for placement on the lunar surface in 20 to 40 times less than required. Full protection would be enough with 5 meters layer of fused lunar regolith. We believe that it would be rational to build a multi-storey building with a wall thickness of 0.5 m. This will ensure maximum protection on the lower floors. Proposed 3-D printer for five years could construct a building with an area of about 150 m2 with a ceiling height 2.5 m.
Subjects
EngineeringAsk about this article
Answers come only from this article's title, abstract and keywords, each sentence pointing to where it comes from. Your question is sent to OpenAI to write the answer. Scholars Central does not store it.
Similar by topic
Research article · 3 Aug 2022
Novel Method to Design and Construction a Dual-Purpose Solar Oven for Baking Bread
Research article · 6 May 2020
Performance Analysis of a Branded and Locally Constructed Modified 1 KVA Sine Wave Solar Power Inverter for Domestic Electric Power Supply
Conference abstract · 17 Sep 2018
Construction of a solid-state overall water-splitting photocatalyst, sensitive to red-light, for solar hydrogen production
Conference abstract · 29 Aug 2018
The effect of steam curing by solar energy on the prefabrication constructions
More from this journal
The newest in Journal of Aeronautics & Aerospace Engineering.
Research article · 17 Jul 2026
Numerical Analysis of Influence of Inward Dimples on Aerodynamic Characteristics of Symmetrical Airfoil Using CFD
Review article · 28 May 2025
Modelling of Hypersonic Flows and their Applications
Research article · 19 Apr 2025
Design and Multidisciplinary Analysis of Commercial Aircraft
Conferences in this field
Upcoming conferences in this field.
Follow
New articles from what you follow go into your email digest, once you agree to alert emails.
- JournalJournal of Aeronautics & Aerospace Engineering
- SubjectEngineering
- BylineArticles whose byline prints “Valentin K Sysoev”
- BylineArticles whose byline prints “Alexander V Bagrov”
- BylineArticles whose byline prints “Vladislav A Leonov”

