Scholars Central

Research articlePublished 2013

Destructive testing and production system integrity

Authors: Ishaya Z. D., Dauda Mohammed, PamG. Y., Kulla D. M.

Ask about this article

Abstract

Select any words in the title or abstract, or press this and choose a sentence.

Destructive testing of automobiles is performed to determine the tensile strength for static and dynamic stability of the welded vehicle body or part. The specific objectives of destructive testing are to detect and correct inactive welds and other production system weaknesses that may not show up under normal production conditions. This will ensure high system integrity and to determine service life of the products, processes and the production system. The testing was conducted using the Descriptive design. The sixteen (16) number destructive testing was evaluation using percentile and comparative method. The data collated were tabulated, analyzed and graphically presented using Micro-Soft Excel software. The major tools for the test include the Destructive Work Table, Hydraulic Spreader, Torque Wrench, Pneumatic Chisel and Personnel Protective Equipment. Hydraulic powered Spreader with the capacity of up to 700 Bars was used to split the welded metal sheets, while Chisel and Hammer are used to create maximum access for Spreader to enable good application. The tensile strength global targets are that failure should not exceed 0.5% and 1.0% for safety and non-safety welds respectively. The test frequency was one car for every 3months. The destructive tests result shows downward trends defined by Y = 0.642 – 0.020X for safety spots and Y = 0.986 – 0.013X for non-safety spots. The overall results show continuous improvement despite the incapability of some production means that questions the production system integrity.

Ask about this article

Answers come only from this article's title, abstract and keywords, each sentence pointing to where it comes from. Your question is sent to OpenAI to write the answer. Scholars Central does not store it.

Try:

Similar by topic

More from this journal

The newest in Advances in Applied Science Research.

All its articles

Follow

New articles from what you follow go into your email digest, once you agree to alert emails.

  • JournalAdvances in Applied Science Research
  • BylineArticles whose byline prints “Ishaya Z. D.”
  • BylineArticles whose byline prints “Dauda Mohammed”
  • BylineArticles whose byline prints “PamG. Y.”
  • BylineArticles whose byline prints “Kulla D. M.”

For authors and organisers

Publish, present and keep up with your field

Find the right journal for your paper and submit your manuscript.

Photo: Pexels