Conference abstract · 24 Sep 2014
Conference abstractPublished 5 Oct 2015
MetNet precursor units high level shock testing
INTA, Spain
Abstract
Select any words in the title or abstract, or press this and choose a sentence.
The MetNet MMPM Mission is implemented in collaboration with Finnish Meteorological Institute (FMI), Lavochkin Association, Russia (LA), Russian Space Research institute (IKI) and Instituto Nacional de Tecnica Aeroespacial, Spain (INTA). MetNet in situ observation lander mission for Martian atmospheric science is based on a new semi-hard landing vehicle called the MetNet Lander (MNL). The MNL will have a versatile science payload focused on the atmospheric science of Mars. INTA has developed two units for this mission the Tri-axial magnetometer (MOURA) that is located on the top of the outer part of the inflatable breaking unit and the Solar Irradiation Sensor (MetSIS) that will be placed on top of the MetNet Lander extensible boom. The Solar Irradiance Sensor is equipped with wireless optical communication capabilities. The first terminal (OWLS-MetSIS-I), is situated in the bottom of the Solar Irradiance Sensor. The second terminal of the wireless communication system is placed on the base of the meteorological boom. The Units are going to be mounted on a penetrator type of lander that will reach Martian surface at a speed of 200 km/h. This impact introduces shock loads of 500 g during 15-20 ms. One of the main challenges for the qualification of the units was to develop a testing facility able to reproduce the shock levels suffered by the different units on the landing stage. A testing facility was developed at INTA by using a modified air pressure cannon, a deceleration chamber is mounted on the tip of the cannon. The units are mounted on a polystyrene bullet, a housing for the units is performed on the bullet. There is also mounted on the bullet, an electronic board with an accelerometer and a memory to record the data for each impact test. Each of the units was successfully tested on this facility achieving the required shock levels.
Subjects
EngineeringAsk about this article
Answers come only from this article's title, abstract and keywords, each sentence pointing to where it comes from. Your question is sent to OpenAI to write the answer. Scholars Central does not store it.
Similar by topic
Conference abstract · 11 Jun 2018
Manganese acetylacetonate as the precursor of high capacitance manganese oxides nanoparticles – the only active component in the supercapacitor electrode
Review article · 2018
Numerical Analysis of the Shock Efforts on the Stress Level in the Dental Prosthesis Elements
Case report · 2014
High Level of Heat Shock Protein 25 (Hsp25) Expression in Atherosclerotic Lesions
Conference abstract · 15 Sep 2020
The Effects of PLGA-Curcumin Nano-Formulation on the Levels of Nf Kappa B Sub-Units in Cancer Cell Lines
More from this journal
The newest in Journal of Aeronautics & Aerospace Engineering.
Research article · 17 Jul 2026
Numerical Analysis of Influence of Inward Dimples on Aerodynamic Characteristics of Symmetrical Airfoil Using CFD
Review article · 28 May 2025
Modelling of Hypersonic Flows and their Applications
Research article · 19 Apr 2025
Design and Multidisciplinary Analysis of Commercial Aircraft
Conferences in this field
Upcoming conferences in this field.
Follow
New articles from what you follow go into your email digest, once you agree to alert emails.
- JournalJournal of Aeronautics & Aerospace Engineering
- SubjectEngineering
- BylineArticles whose byline prints “J Azcue”
- BylineArticles whose byline prints “M Reina”
- BylineArticles whose byline prints “I Arruego”
- BylineArticles whose byline prints “V Eiriz”
- BylineArticles whose byline prints “A Sanchez”
- BylineArticles whose byline prints “A Carretero”
- BylineArticles whose byline prints “H Guerrero”
- BylineArticles whose byline prints “L Sabau-Graziati”

