Conference abstract · 31 Jul 2017
Conference abstractPublished 2 Jul 2018
Power conversion efficiency of solar-pumped solid-state 4-level lasers
Pontificia Universidad CatÃ?³lica de Chile, Chile
Abstract
Select any words in the title or abstract, or press this and choose a sentence.
The first solar-pumped lasers required highly concentrated sunlight to surpass high lasing thresholds. Nd:YAG waveguides sensitized by luminescent nanocrystals reached lower thresholds and were further improved by co-doping ions with broad vibronic absorption bands, e.g. Cr3+, providing high efficiencies. Alternatively Yb:YAG could be sensitized by Nd3+ with efficient energy transfer, rendering co-doped Ce, Cr, Nd, Yb:YAG ceramics promising candidates for high-efficiency solar lasers. Comparing the laser output power with the direct normal irradiance (DNI) of sunlight, power conversion efficiency (PCE) can be defined in analogy to photovoltaic systems. This efficiency is quite different from a conversion efficiency of a pump rate at fixed wavelength (e.g. diode pumping), as it includes the solar spectrum, that is only partly absorbed within certain spectral bands by the active laser medium. The PCE is increased by high broadband absorption cross sections that ideally cover dominant parts of the solar spectrum, as realized today using novel co-doped YAG materials. However, high PCE and low lasing threshold depend also on a large overlap of the intensity distribution of concentrated sunlight with the laser mode. Pumping may be improved, e.g. by fibers that are efficiently focused into the gain medium. In this contribution the PCE of a solar-pumped laser using co-doped YAG ceramics is studied theoretically using four-level laser rate equations. It will be shown how the PCE depends on the spectral absorption cross section of the laser medium and on the intensity overlap of pump and laser light within the laser medium. Of particular interest will be the optimal absorption cross section of the lasing material in terms of spectral shape and quantum defect of the laser medium, which is of relevance for the design of future laser materials. Recent Publications: 1. P D Reusswig et al. (2015) Title. Scientific Reports 5, 14758 2. M Yamaga et al. (2012) Title. J. Appl. Phys. 112, 063508 3. K Fujioka et al. (2013) Title. J. of Luminescence, 143, 10 4. V Lupei et al. (2016) Title. J. of Luminescence, 170, 594 5. P Samuel et al. (2011) Title. Optical Materials 34, 303.
Subjects
Physics & AstronomyAsk about this article
Answers come only from this article's title, abstract and keywords, each sentence pointing to where it comes from. Your question is sent to OpenAI to write the answer. Scholars Central does not store it.
Similar by topic
Perspective · 31 Mar 2025
Solid-state Laser Advancements: Power, Pulses and Applications
Opinion · 7 Dec 2021
A Short Note on Solid-State Laser
Research article · 2016
Selective Excitation of Higher-radial-order Laguerre-Gaussian BeamsUsing a Solid-state Digital Laser
Research article · 7 Aug 2020
Technical Analysis and Qualitative Overview of High Power Lasers with Emphasis on Fiber Lasers and Diode-pumped Solid-State Lasers having Potential for Applications in Aeronautics and Aerospace Engineering
More from this journal
The newest in Journal of Lasers, Optics & Photonics.
Article · 17 Feb 2026
Analysis of Elliptical PCF Involving D Shaped Air Hole in Core for Terahertz Criterion for Optical Communication
Brief report · 29 Nov 2025
Lasers Revolutionize Medicine: Diagnostics, Surgery, Therapy
Opinion · 29 Nov 2025
Silicon Photonics: Advancing Scalable, Cost-effective Optical Networks
Conferences in this field
Upcoming conferences in this field.
Follow
New articles from what you follow go into your email digest, once you agree to alert emails.
- JournalJournal of Lasers, Optics & Photonics
- SubjectPhysics & Astronomy
- BylineArticles whose byline prints “Sascha Wallentowitz”
- BylineArticles whose byline prints “Birger Seifert”

