Conference abstract · 29 Jun 2017
Conference abstractPublished 18 Nov 2019
Systematic assessing over-pressure characterization by using lateral transfer reference case in basin modeling
PetroChina Research Institute of Petroleum Exploration & Development, Beijing, China;GeoPOP, Department of Petroleum Engineering, Heriot-Watt University, Riccarton, Edinburgh, UK
Abstract
Select any words in the title or abstract, or press this and choose a sentence.
Developing a deep-water basin raises many issues and challenges; one of the most significant and necessary issues is overpressure prediction. Basin modelling to construct full scale models is an effective way to find out overpressure distribution in many conditions. However, it is difficult to obtain data about highly heterogeneous complex structures in deep-water basins. The data collection is difficult and costly. Therefore, predicting overpressure formation as accurate as possible with minimal data and costs become interesting and important in both economic and time aspects. Tilted sandy aquifers enclosed in muddy sediments (fluid lateral transfer) are a good reference case which is not uncommon in deep-water basins worldwide and has been well studied. This paper shows that, by applying basin modelling and statistical response surface methodology, not only is a parameterized prediction possible but also the uncertainty of the parameters can be taken into consideration at the same time. Summarized and obtained influential factors on overpressure and its sensitivity to their influence: over-burden mud sedimentation rate, clay content, aquifer depth and aquifer relief, which are proportional to overpressure at the tilted sandy aquifers. Aquifer bending was found to have an inverse influence on overpressure. And found that aquifer thickness, basin scale and basin depth do not have any obvious interaction with overpressure in the system. Obtained relationship between overpressure and the influence factors by using response surface methodology in 364 models, got 99% models relative error were less than 30%. The practicability which has 5.3% relative error was proved by basin data of Central North Sea in last section. The result forms the basis for follow-on research that can seek to further generalize the approach to a wider set of systems and their associated descriptive parameters.
Subjects
Petroleum & MiningAsk about this article
Answers come only from this article's title, abstract and keywords, each sentence pointing to where it comes from. Your question is sent to OpenAI to write the answer. Scholars Central does not store it.
Similar by topic
Conference abstract
The application of architectural elements analysis in characterizing complex reservoir: A case study of Yongan town oil field, Dongying Sag, Bohai Bay Basin, China
Conference abstract · 7 Feb 2022
Design analysis of hydro-fracture with reference to the sandstone porous media of the Upper Assam Basin
Research article · 25 Dec 2017
Bacteriological assessment of river Jataganga, located in Indian Himalaya, with reference to physico-chemical and seasonal variations under anthropogenic pressure: a case study
Conference abstract · 29 Nov 2015
Ultimate CO2 Storage Capacity of an Over-pressurized Aquifer
More from this journal
The newest in Oil & Gas Research.
Case report · 8 Jan 2026
Advanced EOR Techniques: Chemical, Microbial, Nano, AI
Mini review · 8 Jan 2026
Reservoir Characterization: Unlocking Oil and Gas Potential
Short communication · 8 Jan 2026
Fracking: Balancing Energy Production and Environmental Risks
Conferences in this field
Upcoming conferences in this field.
Follow
New articles from what you follow go into your email digest, once you agree to alert emails.
- JournalOil & Gas Research
- SubjectPetroleum & Mining
- BylineArticles whose byline prints “Jiangchen Han”
- BylineArticles whose byline prints “Ailin Jia”
- BylineArticles whose byline prints “Gary. D. Couples”
- BylineArticles whose byline prints “Jingsheng Ma”
