Conference abstract · 29 Oct 2020
Conference abstractPublished 23 Nov 2020
Nano asphalt production using microemulation and sonication method: Yield optimization using surface response
Itenas Bandung-TU, Germany
Abstract
Select any words in the title or abstract, or press this and choose a sentence.
The largest natural asphalt deposit in the world is located in Buton Island (Indonesia) which is around 677 million tons. Efforts in utilizing the Asbuton rock to produce asphalt as the replacement of petroleum asphalt have been carried out by other researchers, but they only produced a conventional type of asphalt. Also in general, the method that was used is quite expensive. The conventional asphalt in road pavement is unable to withstand traffic loads and excessive temperatures, resulting in deformation. This research is about making Nano asphalt from Asbuton rock with using a combination of micro emulsion technique and sonication. The advantage of this technique is the effectiveness of the process in producing the Nano asphalt that is by extracting the asphalt from the pores of Asbuton rock simultaneously forming (in-situ) the nanoparticles. Experimental variables that are varied in this study are the temperature, oil fraction, type of solvent, particle size, and type of surfactant (HLB). To find the optimum Yield of Nano asphalt, the involved variables are simulated and optimized by using Factorial Design, Pareto Diagram, and Response Surface methods. The comprehensive results from the simulation are presented in this report including the significant variables which were optimized to produce the optimum Yield of Nano asphalt. The optimum Yield of nano asphalt theoretically generated from Response Surface ranged between 80 – 99.90 %. The results of validation with experiments using optimized variables show the similarity between the optimum Yields and the simulated Yields value. The produced Nano asphalt was investigated by Transmission Electron Microscopy (TEM), Scanning Electron Microscopy (SEM), Infrared Spectrophotometer (IR) and X-Ray Diffraction (XRD) to prove the quality of Nano asphalt.
Subjects
EngineeringMaterials ScienceAsk about this article
Answers come only from this article's title, abstract and keywords, each sentence pointing to where it comes from. Your question is sent to OpenAI to write the answer. Scholars Central does not store it.
Similar by topic
Conference abstract · 16 Feb 2021
Nano Asphalt Production Using Microemulation and Sonication Method: Yield Optimization Using Surface Response: A Review Article
Conference proceeding · 26 Dec 2020
Nano Asphalt Production Using Micro emulation and Sonication Method: Yield Optimization Using Surface Response
Research article · 5 Dec 2020
Central Composite and Response Surface Method for Optimizing the Production of Nano Asphalt Rubber from Asbuton
Conference abstract · 29 May 2017
Application of response surface methodology for optimizing adsorption performance of magnetic graphene oxide nanocomposites for removal of methadone
More from this journal
The newest in Journal of Material Sciences & Engineering.
Article · 19 Feb 2026
Progress and Challenges in AlGaN/GaN HEMT-Based Bio sensing
Perspective · 29 Dec 2025
Nanostructured Thin Films: Advancing Next-Generation Electronics
Brief report · 29 Dec 2025
Microstructural Defects: Impact on Material Properties and Performance
Conferences in this field
Upcoming conferences in this field.
Follow
New articles from what you follow go into your email digest, once you agree to alert emails.
- JournalJournal of Material Sciences & Engineering
- SubjectEngineering
- SubjectMaterials Science
- BylineArticles whose byline prints “Riny Yolandha Parapat”

