Article · 22 Mar 2024
Conference abstractPublished 15 Feb 2023
Process intensification and optimization for sonocrystallisation of uranium peroxide
Bhabha Atomic Research Centre, India
Abstract
Select any words in the title or abstract, or press this and choose a sentence.
Peroxide precipitation is an emerging process in nuclear technology and one of the well-known methods for production of first intermediate uranium compound before uranium bearing fuel production. Though the conventional method of precipitation is practiced worldwide, it suffers from the limitation of non-uniform particle formation and lesser control over particle growth and size. Hence there is always a scope to study the effect of novel technique for process intensification. Application of ultrasound or sonochemical technique is one of the techniques which can intensify the crystallization event to a large extent by the impact of its cavitational process imparting micro mixing, enhanced mass transfer and the effect of additional spontaneous nucleation. It also facilitates in enhancing the crystal shape and size with better consistency and can control physical and morphological characteristics of the powder in several ways. Here, study was carried out for establishing important process parameters namely uranium cocn and temperature for ultrasonic precipitation compared to conventional methods in laboratory scale with an ultrasound horn at 35 KHz. Uranyl nitrate with 30% hydrogen peroxide was used for the reaction in 1 liter scale. No appreciable difference in the phases has been found from the XRD study [Figure 1]. However a more homogeneous, regular and smooth crystalline appearance is observed in sonochemical precipitation route compared to conventional route under SEM study at 100 g/L uranium with 60ºC temperature [Figure 2]. The crystal shape is rhombohedra with a spherical aggregation in comparison to needle shaped crystals in conventional route. Significant improvement is also seen in specific surface area and tap density of the prepared powder in sononchemical route. The powders obtained from this novel technique are having recovery more than 99.9% w.r.t. uranium. The purity of the synthesized powder also meets the specification of nuclear grade quality. Overall, the sonochemical method of precipitation of uranium peroxide is a fast, simple, convenient and intensifying technique imparting appreciable morphology and physical characteristics over the conventional precipitation process. Keywords: Precipitation, Uranium peroxide, Morphology, Ultrasound, Cavitation.
Subjects
EngineeringMaterials ScienceAsk about this article
Answers come only from this article's title, abstract and keywords, each sentence pointing to where it comes from. Your question is sent to OpenAI to write the answer. Scholars Central does not store it.
Similar by topic
Conference abstract · 16 Apr 2018
Focus on optimization of colorimetric assay for the detection of hydrogen peroxide using a green synthesis pathway for silver capped nanoparticles
Perspective · 29 Jul 2025
Process Intensification: Revolutionizing Chemical Engineering For Sustainability
Article · 2 Apr 2025
Reactive Distillation as a Process Intensification Technique in Fine Chemical Synthesis
Editorial · 30 Mar 2025
Advances in Process Intensification
More from this journal
The newest in Journal of Material Sciences & Engineering.
Article · 19 Feb 2026
Progress and Challenges in AlGaN/GaN HEMT-Based Bio sensing
Perspective · 29 Dec 2025
Nanostructured Thin Films: Advancing Next-Generation Electronics
Brief report · 29 Dec 2025
Microstructural Defects: Impact on Material Properties and Performance
Conferences in this field
Upcoming conferences in this field.
Follow
New articles from what you follow go into your email digest, once you agree to alert emails.
- JournalJournal of Material Sciences & Engineering
- SubjectEngineering
- SubjectMaterials Science
- BylineArticles whose byline prints “Shrishma Paik”
- BylineArticles whose byline prints “SK Satpati”
- BylineArticles whose byline prints “DK Singh”

