Thorium molten salt reactor (TMSR) is one of key reactors of the generation IV in nuclear power system, and molten salt is used as fuel and coolant in TMSR, therefore
fuel burn up limit of Light Water Reactor (LWR) is one of the most promising methods to enhance the commercial competitiveness of nuclear power plants. The benefits with high burn
process, a process that is universally accepted for reprocessing of spent nuclear fuel now and for GEN IV reactor systems. It also identifies the challenges that a new separation process
service life of an operating nuclear power plant (NPP) increases, the potential misunderstanding of the degradation of aging components must receive more attention. Integrity assurance analysis contributes to the…
service life of an operating nuclear power plant (NPP) increases, the potential misunderstanding of the degradation of aging components must receive more attention. Integrity assurance analysis contributes to the…
source, 150kGy, 10.5kGYh−1 dose ratio, at multipurpose reactor, in CTR/IPEN, Instituto de Pesquisas Energéticas e Nucleares, São Paulo. Carbon dioxide (CO2): physical blowing agent, selected according
will be >95%, and the final disposal of nuclear waste will be minimized. The design of a high-temperature ceramic reactor makes the burner system safer. Part of fission products
suggested as an innovative approach to GEN-IV nuclear power plants in form and type of Small Modular Reactors (SMRs). The hot exhaust from the Air-Brayton cycle passes through
PUREX process options for high burn-up spent fuel from nuclear power plants (NPP) with WWER (PWR) water-cooled reactors. The analysis of published and newly obtained data
effect of some major nuclides on the reactivity of nuclear fuel for fuel pin cell in the Pressurised Water Reactor (PWR) was calculated using MCNP5_RSICC, 1.2 and WIMSD
global energy demands and climate change mitigation. This article examines the multifaceted role of nuclear energy, highlighting its significant benefits, such as low greenhouse gas emissions, high energy density…
designing the Yenisei space nuclear power unit (SNPU) dur-ing a ground-based tests of its prototypes. For measuring W of the Yenisei SNP reactor, statisti-cal methods were chosen
nuclear and plasma physics, chemistry, biology as well as in industry, since its discovery in 1781. Tungsten is now considered one of the best candidate materials for fusion reactors ... hotter plasmas and it might…
reactor components with good thermo-mechanical and physical properties, coupled with low-activation characteristics. Double differential light charged particle emission cross section, which is a fundamental data to…
HDPE) were degraded using a semi-batch reactor along with modified fly ash catalysts. The liquid products were analyzed using FTIR, nuclear magnetic resonance (1H, 13C, and DEPT
spent nuclear fuel (SF) and high-level liquid waste (HLLW) must no longer be radioactive waste but a potential vein of rare metal. It is therefore quite natural that such ... Tokyo Tech, the program relies on the…
using such techniques for nuclear applications. This research focuses on applications in three significant decision-making and safety-related subfields. These include radiation detection, reactor health and monitoring…
For authors and organisers
Publish, present and keep up with your field
Find the right journal for your paper and submit your manuscript.