NMFs into the activated carbon by physical and chemical methods. NMFs are subjected to pyrolysis from 300-700°C to find the optimum temperature for maximum adsorption. Potassium hydroxide
interrupted.Three main pathways are being explored for the thermochemical conversion of lignocellulose: Gasification, pyrolysis and liquefaction. Biomass pyrolysis, depending on the temperature and the heating rate…
were successfully deposited on to the glass substrates at 573 K temperature using spray pyrolysis technique. Along with Fe and Se source, acetic acid (CH3-COOH) was used
CuInS2 thin films are deposited by spray pyrolysis technique. CdS thin films are deposited from the aqueous solution of cadmium chloride and thiourea with [Cd]/[S] ratio =1 on glass
SnO2 thin films were prepared by spray pyrolysis technique. Aqueous solution (0.05M) of SnCl2·2H2O in deionized water was chosen as the starting solution for the preparation of thin
present investigation, low resistive transparent Nano-crystalline cadmium oxide chemical spray pyrolysis technique deposited thin films. The effect of deposition temperature on structural, electrical, and optical…
Spray pyrolysis is simple and inexpensive method to prepared thin films on large area. CuInTe2(1-x) S2x thin films were deposited by this method. Optical band gap was determined
dioxide (SnO2) thin films were prepared using the thermal spray pyrolysis method from SnCl2.2H2O isopropyl mixing with water solution on the glass substrate heated at 450◦C. The films were
Spray pyrolysis is simple and inexpensive method to prepared thin films on large area. CuInTe2(1-x)S2x thin films were deposited by this method. Optical band gap was determined
steel industry, which are composed of various metal oxides promoting a catalytic effect on pyrolysis products improving their quality. It is a cheap and sustainable alternative to replace zeolites ... transform…
steel industry, which are composed of various metal oxides promoting a catalytic effect on pyrolysis products improving their quality. It is a cheap and sustainable alternative to replace zeolites ... transform…
Thermo-catalytic reforming is a three-stage thermo-chemical process combining catalytic pyrolysis, cracking and reforming to decompose organic materials into gas, oil, and char while upgrading these products throughout…
from coal is possible through a variety of conversion processes (e.g., Fischer−Tropsch synthesis, pyrolysis, or direct coal catalytic liquefaction) but one, in particular, hydrothermal liquefaction (HTL), often referred…
attention in recent years due to its renewability and carbon neutrality. Biomass gasification and pyrolysis has been investigated as one of the technologies for efficiently utilization of biomass energy. However…
Several ligninolytic microorganisms responsible for the degradation of lignin are also discussed. In addition, pyrolysis, liquefaction, gasification and microwave treatment for lignin conversion to biofuels and…
environmentally friendly compound. Various synthesis techniques, such as chemical vapor deposition, electrodeposition, spray pyrolysis, rapid thermal processing and sputtering for CIS thin films have been previously…
Biochar, which is rich in aromatic carbon and minerals, is a product of biomass pyrolysis at temperatures ranging from 350°C to 1000°C in oxygen-limited environments. In recent
high heating value of 35MJ/kg (fossil diesel 42MJ/kg) in comparison to pyrolysis oil with oxygen content 38% and heating value 18MJ/kg. A further process of hydrotreatment ... drop-in fuel, gasoline or diesel, can be…
Biorefinery Energy Cane - BEC) varieties for dedicated utilization in different application such: Power Generation; Pyrolysis; Gasification; Pulp & Paper, Bio-Ethanol, etc. These innovative Energy Crops are similar and…
must be transported and disposed of in landfills or be burned in mass incinerators. Pyrolysis is a thermal treatment designed to recover energy, which can also contribute to reduce ... biodegradable waste volume of…
petroleum processing in Mongolia. The imported products which are light petroleum have 0.62% and pyrolysis gasoline has 8.9% benzene content. Therefore, a pyrolysis gasoline does not meet Mongolian standard with
uncertainty on a sustainable supply of feedstock material. Through the analysis of maize residue, pyrolysis, and biochar application rates, this paper unveils the fact that a region generates enough feedstock
Zinc oxide (ZnO) nanoparticles (NPs) were prepared by pneumatic spray pyrolysis technique (PSP) using zin acetate solution as a precursor and tetra-butyl-ammonium as a dopant. The morphological, structural
sustainable and environment-friendly. The oil extracted from spirulina and chlorella microalgae through pyrolysis process at a temperature of 350oC, and the bio-oil properties were analysed. When compared
methods of waste management and suggested a better method of plasma gasification, in which pyrolysis of solid waste takes place at very high temperature thus ensuring syngases as the output
For authors and organisers
Publish, present and keep up with your field
Find the right journal for your paper and submit your manuscript.