electrically conducting composite material polyacrylonitrile/Polypyrrole (PAN/Ppy) was prepared by sol-gel method. The temperature dependence of the DC electrical conductivity was measured on compressed pellets by using
Streptococcus mutans (ATCC 70069). The bioactive glass was prepared usin g the sol-gel method and had a molar composition of 80% SiO2, 4% P2O5 and 16% CaO. Four groups
Mesoporous MCM-41 has been synthesized by sol-gel method at room temperature possessing good thermal stability, high surface area as well as retention of surface area at high temperature
evaluate this system as a potential therapeutic agent. The nanoparticles were synthesized via sol-gel method. The sample was characterized using FTIR, SAXS, PCS, Zeta Potential analysis, Thermal analysis
with various amounts of the constituent oxides and different porosities were synthesized by sol-gel method (with or without supercritical drying) followed by selective noble metal photodeposition on the desired
bioactive glass was prepared by the sol-gel method from sand as precursor. The glass monolith was sintered at 950 o C, before carrying out immersion studies in simulated body
well as photocatalytic activity of titanium dioxide (TiO2) thin films prepared using sol-gel method. Used substrates are: Si, textured silicon and nanowires silicon (SiNWs). The surface morphology
nanocomposites have been synthesized by a Sol-Gel method based on polymeric network of polyvinyl alcohol (PVA). In this method mixture solvent of 50:50 ethanol- water was used
BGZn5) were prepared by sol-gel method and characterized. The biocompatibility and surface reactivity evaluation of the glass samples was assessed through in vitro cell culture [alkaline phosphatase (AP) activity
Nano size TiO2 powder with anatase and rutile structure was prepaired by a sol-gel method using TiCl4 ethanol solution. The TiCl4 acts as precursor in this reaction. The obtained
work, Titanium dioxide (TiO2) nanoparticles were produced using two different reacting mediums by Sol-gel method which were subsequently applied by layer by layer (LBL) technique on Nylon
Chitosan-?-glycidoxypropyltrimethoxysilane (GPTMS)-tetraethoxysilane (TEOS) hybrid membranes were prepared by a sol-gel method. Effects of Si(IV) released from them on proliferation and differentiation were examined in…
with the formula K2Zn3[Fe(CN)6]2 (KZnFc) was synthesized by a sol-gel method and characterized by X-ray diffraction (XRD) and scanning electron microscope (SEM). The adsorption
this research a fraction of zircon is substituted with silica crystals. A Sol-Gel method has been applied in order to improve the inclusion efficiency of hematite into silica
diameter) were prepared by encapsulation of iron oxide NPs with silica using sol-gel method and characterized through spectroscopy methods. The SIO NPs were chemically activated by cyanogens bromide
Cadmium Oxide (CdO) nanoparticles have been synthesized by simple approach of sol-gel method at room temperature using cadmium acetate (precursor) and starch as stabilizing agent. The precipitate of cadmium
covalent links between the inorganic and the organic networks were prepared by the sol-gel method. The silica content in the hybrid filmswas varied from0 to 22.5/wt%. The prepared
Nanocrystalline particles of cobalt ferrite (CoFe2O4) were prepared by the sol-gel method using iron nitrate, Fe(NO3)3.9H2O, cobalt nitrate, Co(NO3)2.6H2O, and TEOS, Si(OC2H5
inorganic precursor and triblock copolymer (Pluronic P123) as the template via sol-gel method. The resulting materials were characterized by thermogravimetric analysis (TGA), small-angle XRD, wide-angle XRD, high
which were then used to produce a variety of hybrid materials by the sol-gel method. Using FTIR and NMR analyses, it was confirmed that the inorganic phase
Supported TiO2 nanoparticles were synthesized by sol-gel method using blue-green phosphor and characterized using X-ray diffraction (XRD), diffused reflectance UV-Visible spectroscopy, Fourier-transform infrared and…
chitosan / PVA solutions in a ratio of 1: 1 (w / w) by the sol-gel method, then different concentrations of plasticizer were added (20%, 40% and 60%). For the formation
different concentrations (1:1,1:2,1:4, Cs:PVA) by the sol-gel method and adding different amounts of zinc oxide nanoparticles (0.5,0.7,1% w/v) previously synthesized
used to modified MWCNTs substrates. TiO2 and WO3 are synthesized by impregnation and sol-gel method, respectively. Pd and AuPd are both synthesized by photosynthesis using SRRC X-ray Irradiation
phosphor was activated with different concentrations of Eu3+ and Dy3+ fabricated using the sol-gel method of synthesis such that, ZnO-TiO2: xDy3+ and yEu3
For authors and organisers
Publish, present and keep up with your field
Find the right journal for your paper and submit your manuscript.